0 itemsRp0

No products in the cart.

Alat ukur

Alat ukur

 

CFM dan CMM Thermo Anemometer
alat ukur

 

 

 

 

 

Spesifikasi :

Alat ukur kecepatan angin CFM dan CMM
Applications:
HVAC installation, repair, diagnostics, and optimization
Ventilation system installation, servicing, and analysis
Environmental wind and temperature testing/ analysis
Boiler rooms
Automobile aerodynamic testing
Plant/Facilities maintenance
Specification : (units, range, accuracy)
m/s (meter per second), 0.40~30.00,±3%±0.20m/s
Ft/m (feet per minute): 0.40~45.00, ±3%
Km/h (kilometer per hour): 80~8858, ±3%
Mile/h (mile per hour): 1.4~162.0, ±3%
Knots(nautical miles per hour): 0.9~100.4, ±3%
Air temperature cfm dan cmm thermo anemometer: 0.8~87.0, ±3%
Air relative humidity: -20~60°C(-4~140°F), ±1°C(±2°F)
Air flow: 0~100%RH, ±3%
CFM: Range, Area
CMM: 0~99990, 0~9.9990ft²
CMS: 0~99990, 0~9.9990m2
Flow area setting: 0~9999, 0~9.9990m2
Max/Min function
Display backlight
Auto power off
°C/°F selection
USB interface (Windows OS)

 

Hot Wire Anemometer

Hot Wire Anemometer( Alat ukur kecepatan angin di dalam ducting, cerobong, pipa, dll )

Spesifikasi  :
Hot Wire Anemometer( Alat ukur kecepatan angin di dalam ducting, cerobong, pipa, dll )
Alat ukur kecepatan angin di dalam ducting, cerobong, pipa, dll
The digital Anemometer with telescoping probe measure in
HVAC ducts and other small vents; extends up to 40ft/min.
-slim probe, ideal for grilles & diffusers.
-large LCD display with backlight, reading the air velocity & temp.at the same time.
-Thermal anemometer, available for very low air velocity measurement.
-Combination of hot wire and standard thermistor, deliver rapid
and precise measurements.
-Records maximum/minimum readings with recall & data hold.
‘-Microprocessor circuit assures maximum possible accuracy,
provides special functions and features.
-The portable anemometer provides fast, accurate readings, with
digital readability.
-Multi-functions for air flow measurement: m/s, km/h, ft/min, MPH,
Knots & build in temperature °C/°F.
-Thermistor sensor for Temperature measurement, fast response time.
-Applications: Environmental testing, Air conveyors, Flow hoods,
Clean rooms, Air velocity.
-Air balancing, Fans/motors/blowers, Furnace velocity, Refrigerated case
and Paint spray booths.
-Meter Size(HxWxD):198mm×85mm×45mm
-Weight:390g
-Accessories: 9V battery ,black bag,manual,blister card and Anemo probe
Air Velocity (Range, Resolution, Accuracy)
m/s (meter per second) : 0.1~25.0m/s, 0.01m/s, ±5%+0.1m/s
km/h (kilometers per hour): 0.3~90.0km/h, 0.1km/h, ±5%+0.1km/h
ft/min (feet per minute): 20~4925ft/min, ft/min, ±5%+1ft/min
MPH (miles per hour): 0.2~55.8MPH, MPH, ±5%+0.1MPH
Knots (nautical miles per hour): 0.2~48.5knots, 0.1knots, ±5%+0.1knots
Air Temperature Range: 0°C to 50°C(32°F to 122°F), 0.1°C/0.1°F, 1°C/1.8°F

 

Anemometer
Anemometer (Alat ukur kecepatan angin)

Spesifikasi :
Anemometer (Alat ukur kecepatan angin)
Wind Speed Range: 0.3~30m/s, ±5%h
Temperature Range: -10ºC~45ºC, ±2ºC
Resolution: 0.1m/s; 0.2ºC
Measuring unit: m/s,Ft/min, Knots, Km/hr, Mph
Power Source: CR2032, 3.0v × 1
Dimensions: 105(L) × 40(W) × 15(D)mm
Weight alat instrument : 55g approx.
ºC/ºF Selection
Auto /ManualPower Off
Low Battery Indication
Back Light Display
Max/Min wind speed measuring
Average And current wind speed.

 

ANEMOMETER with USB

ANEMOMETER with USB

Spesifikasi  :
ANEMOMETER w/ USB (Alat ukur kecepatan dan volume angin dengan fasilitas koneksi komputer)
Alat ukur kecepatan dan volume angin dengan
fasilitas koneksi komputer
Wind Speed Measuring Range: 0.3 ~ 45m/s
Accuracy of Temperature: ±3%±0.1dgt
Air Velocity Unit: m/s,Ft/min,Knots,km/h,Mph
Wind Volume Range: 0~999900m3/min
Max/Min wind speed measuring
Temperature Measuring Range : 0~45℃
Accuracy of Temperature: ±2℃
℃/℉ Selection
Backlight Display
Low Battery Indication
Analog Quantity Display
Resolution: 0.1m/s
Data Transmission: USB
Menjual Alat Instrument, Alat mengukur

 

Hotwire Anemometer

 Hotwire Anemometer

Spesifikasi :
hotwire anemometer
Alat ukur kecepatan angin di dalam ducting, cerobong, pipa, dll
Functions Hotwire anemometer : Hotwire velocity and airflow, temperature.
Measuring range
Air velocity : 0,15 to 30 m/s
Air flow Hotwire anemometer : 0 to 99999 m³/h
Temperature : -20 to +80°C (included in probe)
Supplied with Ø 8mm hotwire, transport case and calibration certificate.
Display: 2 lines, LCD technology. Sizes 50 x 34.9 mm.
1 line of 5 digits with 7 segments (value)
1 line of 5 digits with 16 segments (unit)
Housing: Shock-proof made of ABS, IP54 protection
Keypad: Metal-coated with 5 keys
Cable: Straight, lg. 2 m
Conformity: electromagnetical compatibility (NF EN 61326-1 guideline)
Power supply: 1 alcaline battery 9V 6LR61
Operating temperature: from 0 to 50°C
Storage temperature: from -20 to +80°C
Auto shut-off: adjustable from 0 to 120 min
Weight: 190g
Languages: French, English

 

 

 

Windspeed and Direction
Windspeed and Direction(Alat Untuk Mengukur kecepatan dan arah angin meter).

Spesifikasi  :

Untuk Mengukur kecepatan dan arah angin

Measuring Wind Speed :
– 0.4 to 45.0 m/s
– 1.4 ~ 62 km/h
–  80 top 8860 ft/min
–  0.8 ~ 88.0 knots
Temperature Range : 0-60ºC
Wind Direction : 16 Direction (resolution 22.5º)
Accuracy : ± 2% + 2d
Resolution : 0.1
Computer Interface : RS 232C
Memory : 24 group
Low battery indicator
Auto-switch off
Power : 4 x 1.5 Volt AAA batter

Sound level meter with USB

Sound level meter with USB (Alat ukur tingkat kebisingan dengan koneksi USB)

Spesifikasi  :

Alat ukur tingkat kebisingan dengan koneksi USB
*This unit was designed according to following standards:
A. International electrician committee standard: IEC PUB 651 TYPE2
B. US national standard: ANSI S1.4 TYPE2
* Measuring range: 30~130 dBA;35~130 dBC
* Accuracy: ±1.5 dB
* Digit & Resolution: 5 digits & 0.1 dB
* Frequency response: 31.5Hz ~8.5KHz
* Measuring level: 30~130, 40~90, 50~100, 60~110, 80~130
* Frequency weighting characteristic: A & C
* Time weighting: FAST/SLOW
* Sampling rate: 2times/second
* Microphone:1/2 inch polarization capacitance microphone
* AC/DC output and Max reading
* PWM output, Calenda and 4700 data store
* USB computer interface and Analysis software
* Overload indication: OVER / UNDER
* Automatic backlight ,Low battery indication and Auto power off
* Packing method: PP box + Gift box
* Power: 1.5V AA* 4pcs or DC 6V 100mA adapter
* Dimension: 256*70*35mm
* Weight: 308g (including batteries)

Sound level meter

Sound level meter (Alat ukur tingkat kebisingan)

Spesifikasi :

Alat ukur tingkat kebisingan
This instrument is compatible with several standards of GB/T 3785,IEC 651 Type 2,ANSIS 1.4 Type 2.It is widely used to test the sound level of environment, mechanic, vehicle,ship and other noise.Fit for industry environment protecting,working,sanitation, teaching search and other departments.
Display: 10mm (0.4″) LCD (Liquid Crystal Display)
Function: LP , Leq ,LN.
Frequency range: 31.5Hz~8kHz
Measurement range:
LP:30~130dB (A)
35~130dB (C)
35~130 dB (F)
Leq :30-130dB
LN .: 0-100%
Resolution: 0.1 dB
Accuracy:1dB
Memory: Maximum value (30groups)
Indicator: Low battery indicator
Alarm: electron
Connector:RS232C
Power supply: 4×1.5v AAA (UM-4 battery
Size: 236 x 63 x26 mm
Weight: 170g (including batteries)
Standed delivery:
1.Main Unit—————1pc
2.Carrying Case…………….1pc.
3.Operation Manual……….1pc.
Optional Accessories:
1.ND9 sound level meter calibrator
2.RS-232 and software
3.External rela
4.Bluetooth interface

Sound Level Meter

Sound Level Meter( Alat ukur tingkat kebisingan)

Spesifikasi  :

Alat ukur tingkat kebisingan
Designed according to IEC651, Type 2, ANSI S1.4 Type 2
CE and ISO 9001

Measuring Range:
30~130dB A , ±1,5 dB
35~130dB C

Level Range Control Switch
30dB to 80dB
50dB to 100dB
60dB to 110dB
80dB to 130dB

Frequency Range : 31.5HZ-8.5KHZ
Linearity Range: 50dB
Digit & Resolution : 5Digits & 0.1dB
Bar Graph : 50dB scale at 1dB step monitoring
Time Weighting Selection : Fast for normal measurement, Slow for checking AVERAGE level of fluctuating noise
Frequency Weighting
A weighting for general sound level measurement
C weighting for checking low frequency content of noise
Power Source : 9 Volt alkaline battery or 9Volt DC adaptor
Dimensions : 265(L) × 72(W) × 35(D)mm
Weight : 300g approx.

Sound Level Meter termasuk :
Battery 1 x 9 Volt alkaline
Windscreen ball
Operation Manual
Carrying Case

Sound Level Meter with USB Connection

Sound Level Meter with USB Connection (Alat ukur tingkat kebisingan)

 

 

 

Spesifikasi

Alat ukur tingkat kebisingan
Sound level meters measure sound pressure level and are commonly used in noise pollution studies for the quantification of almost any noise, but especially for industrial, environmental and aircraft noise.
Spesifikasi soun level meter with usb connection :
Microphone: 1/2 Inch Electret Condenser Microphone
Measuring Range: 30~130dB
Accuracy: ±1.5dB
Frequency Range: 31.5HZ~8.5KHZ
Frequency Weighting: A/C
USB Computer Connect: USB
Data Analysis: online/offline
Data Store: 4700 stock
AC\DC Output: √
Low Battery Indication: √
Over Range Indication: √
Resolution: 0.1dB
Time Weighting Selection: Fast/Slow
Max Hold Function: √
Power: AA*4 battery (with external power receptacle)
Product Net Weight: 300g
Product Size: 183*67*30mm

 

Class 1 Sound Level Meter

Class 1 Sound Level Meter( Alat ukur tingkat kebisingan )

Spesifikasi :

Alat ukur tingkat kebisingan
Sound Level Meter Class 1 (20 to 137 dB)

From the simple sound level measurement to the frequency analysis in real time, DB300/1 covers the most applications in the finding of solutions to get better the noise environment.

Technical data
Dynamic range from 20 to 137 dB
The weighted noise level : LXY
The equivalent continuous level : LXeq
The peak pressure level : LUpk
The noise exposure level : LXE
Real time analyser by octave bands – 16 Hz to 16 kHz
Values and and graphic representation of the NR comfort criteria
Screen: graphical display 240 x 160 pixels – LCD monochrome 16 levels – digital and analogue
display – 3D effect on display
Keypad: 8 sensitive keys
Clock: permanent, saved by internal battery – accuracy better than 0.005%
Memory module: removable Micro SD card 2Go
Environment: from -10 °C to +50 °C
Humidity: from 0 to 90% RH
Size (L x l x e): 270 x 70 x 40 mm
Weight (batteries included): 355 gr
Supplied with transport case, calibration certificate and LDB23 software.

Including:
Acoustic calibrator for class 1 sound level meters.
The acoustic calibrator is the key accessory to calibrate measurement system.
The acoustic source is defined in pressure level and in transmitting reference, it corresponds to the current class 1 standards : NF EN 60942 : 2003 and CEI 60942 : 2003.
It delivers two acoustic pressure levels according to your selection : 94dB or 114dB with a 1000 Hz frequency.

 

Sound Level Meter Calibrator

Sound Level Meter Calibrator

Spesifikasi  :

Sound Level Meter Calibrator( Alat kalibrasi Sound Level Meter)

Alat kalibrasi Sound Level Meter
To calibrate the sound level meter
Standard : GB/T 15173, ANSI S1.40 Class2, IEC 942
Output Sound Level : 94 dB, 114 dB
Accuracy : 0.5 dB
Frequency : 1,000 Hz
Design for : 1″ , ½”
Power Supply : 1 x 9V 6F22 Battery
Dimension : 142 x 47 x 47 mm
Weight : 275 gr

Personal Noise Dosimeter

Personal Noise Dosimeter

Alat ukur total paparan radiasi suara pada
seseorang dalam suatu waktu tertentu

Spesifikasi personal noise dosimeter

Range/Resolution: 70 – 140dBA / 0.1dB
Digital Display: LCD 0.01 – 9999%
Criterion Level: 80, 84, 85 or 90dB
Exchange Rate: 3, 4, 5 or 6 dB
Treshold Level: 70 – 90 (1dB steps)
Frequency weighting: A
Response Rate: Fast or Slow
High Level Detector/Peak Flag: 115dB / 140dB
Size/Weight: 106 x 64 x 34mm / 227g incl. batteries
Mic.: 1/2 Inch electret condenser with 31″ cable
Battery Life: 34 hrs
Event storage: 5 surveys
RS232 Interface
Real time clock

Lux atau Light Meter

Lux atau Light Meter

Alat ukur Intensitas Cahaya
Jika cahaya dalam ruangan tidak cukup atau berlebih akan mempengaruhi aktivitas belajar atau kerja.

Specifications
Display: 4 digital LCD with Back-light
Measuring Range: 0~ 200,000 Lux / Fc (Auto Ranges) (1Fc=10.76)
Accuracy:
<100,000Lux: ±(3%rdg + 5dgt)
>100,000Lux: ±(5%rdg + 10dgt)
Resolution: 1Lux; 0.1Fc
Repeatability: ±2%
Sampling Time: 2.5 second
Sensor: Si photodiode
Operation temperature: 0 ~ 40 °C (32 ~ 104°F)
Operation humidity: less than 80% R.H.
Dimension: 73 x 155 x 36 mm
Weight: 290g /including battery
Power Supply: 1 x 9V battery

UV radiometer

UV radiometer ( Alat ukur radiasi UV pada pengelasan, sterilisasi, curing, DNA research, etc.)

UV radiometer ( Alat ukur radiasi UV pada pengelasan, sterilisasi, curing, DNA research, etc.)
Display: 3 3/4 LCD display, maximum indication 3999
Measurement ranges & resolution: 0-40 mW/cm2 (3 Ranges),
400 μW/cm2 range
4000 μW/cm2 range
40 mW/cm2 range
(1000 μW/cm2 = 1 mW/cm2)
UV sensor spectrum: Band pass 280 nm – 380 nm
Accuracy: ±(4%FS + 2dgt) FS: full scale ( Calibration is executed under the UVA light & and compare with the standard UVA light meter; Special tested under the environment RF Field Strength less than 3V/M & frequency less than the 30 MHz only)
Sensor structure: The exclusive UV photo diode & UV color correction filter.
Sample Time: Approx. 0.4 sec.
Over Range indication: indication of ‘OL’
Operating Temperature & Humidity:
10°C to 40°C(32°F-104°F) 0~70%Rh
Storage temperature-humidity:
10°C to 50°C(14°F-140°F) 0~80%Rh
Power Supply: DC 9V battery, 006P, MN 1604 (PP3) or equivalent.
Power Consumption: Approx. DC 2.7 mA
Dimension: 106x57x26mm (photo detector)
230x72x30mm (meter body)

 

Surface Luminance Meter

Surface Luminance Meter

Alat ukur cahaya permukaan layar/screen dari LED, LCD, OLED dari televisi, monitor komputer, dll
* Measuring range 0.01-39990cd/m2
* Measuring distance =1m
* Object size =?20, increasing with the increase of measuring distance
* Precision:
=+0.5% of the measured value +1 figure
* Indication error:
=+0.5% of the measured value +1 figure (relative to NIM standard)
* Spectrum response characteristics:
In accordance with the standard of national grade I illuminometer
* Linearity error:
=+0.2% of the measured value +1 figure
* Temperature characteristics:
=+0.1% of the measured value +1 figure
* Operating environment:
Temperature: (0-40)°C
Relative humidity: =85%
* Dimensions and weight: 149X71X41mm3
* Power supply: 9V layer-built battery (model 6F22)

 

Solar Power Meter

Solar Power Meter

Spesifikasi solar power meter :

Solar Power Meter Alat ukur intensitas radiasi sinar matahari untuk pembangkit listrik tenaga surya, eksperimen fisika optika, dll.
Resolution: 0.1W/m2, 0.1 Btu/(ft2-h)
Accuracy: ± 10W/m2 [±3 Btu/(ft2-h)] or ±5% of the measured value
Temperature coefficient: ±0.38W/m2 / ? [ ±0.12 Btu/(ft2-h)/?] deviation at 25?
Display: 3-3/4LCD display, maximum displayed numerical value 3999
Shift: <±3% /year
Overload display “OL”
Range: 0.1-399.9 W/m2, 1-3999 W/m2, 0.1-399.9 Btu/(ft2-h), 1-3999 Btu/(ft2-h)
Sampling time: 0.25s/time
Operation temperature and humidity: 0°C to 50°C <80%RH
Storage temperature and humidity: -10°C to 60°C <70%RH
Dimensions and weight: 132(L) x 60(W) x 38 (H)mm
Weight: approx. 150g
Battery needed: 9V battery 6F22
Battery operation life: Approx. 100 hours

 

Gauss Meter 30KG

Gauss Meter 30KG Alat ukur medan magnet

Gauss Meter 30KG atau Alat ukur medan magnet
Spesifikasi Gauss meter 30 kg :
1-axis DC/AC Gaussmeter GM2
Range/Resolution (ST Probe): 0-19,999.9 G / 0.1 G; 20kG- 30kG /1G indicates polarity
Range/Resolution (HS Probe): 0-799.99G / 0.01G indicates polarity
Accuracy (w/ probe) 16° to 29°C: 1% of DC reading / 3% AC +/- 10 Counts / 1% peak hold
Accuracy (w/ probe) -4° to 65°C: 2% of DC reading / 4% AC +/- 10 Counts / 2% peak hold
AC Frequency Range: 45-800 Hz; 3 dB limits are 11 to 1500 Hz.
Peak Hold Speed: 2 millisec pulse is 71%, 5+ millisec pulse is 100%±1%
Output Type: Analog DC Signal.
Output Magnitude (ST Probe): Below 20kG, output is 0.1mV/G. Above 20kG, it is 0.01 mV/G
Output Magnitude (HS Probe): 1mV/G
Meter Size: 5.2 x 3.6 x 1.6 inches; 138 x 91 x 41 mm
Weight: 7.5 oz
Battery: 9 volt alkaline (~40 hour life with ST probe, ~ 20 with HS probe); “Low Battery” indicator

Accesories:
Data Recording USB
Detachable Rubber Boot + Hard Carrying Case

Kilo Gauss Meter

Kilo Gauss Meter

Kilo Gauss Meter atau Alat ukur kekuatan Magnet – Gauss dan Tesla

Typical Applications:
Classify magnets, etc
Testing Audio Speaker Magnet
Analyze Magnetic Circuit and Components
Measure Residual Magnetic Fields

Features:
Contour Case
High Range DC static Kilo gauss meter
Portable
Reference magnet included
Battery power (battery included)
Analog output: ± 200mV DC FS
3½ digit bipolar display
Easy to use
3% error guarantee
Low Cost
Resolution @ Scale 20; 10 mG, @ Scale 200G: 0.1G, @ Scale 2KG: 1G & Scale 20KG: 10G

Specifications:
Range Settings: 20G, 200G, 2KG, 20KG
Bandwidth: 68 Hertz @ 3dB
Case Material: High Impact Styrene
Dimension: 5.8″ x 3.6″ x 2.5″
Power Consumption: 200mW
Battery Life: At least 10 hours with 9V Alkaline
Weight: 11 oz (312 grams)

 

Alat ukur kelembaban dan temperature udara

Alat ukur kelembaban dan temperature udara

Humidity/Temperature/Dew point /Wet bulb temperature Meter atau Alat ukur kelembaban dan temperature udara, dew point dan wet bulb temperature.

Alat ukur kelembaban dan temperature udara, dew point dan wet bulb temperature.
Features
1.Fast response time
2.High accuracy and performance
3.Micro processor-based design
4.Dew point and web bulb temperature
5.Max/Min data hold function
6.Dual display temperature and humidity
7.Backlight and auto power off

* Humidity range: 0~100%RH
* Temperature range: -30~100 ° C(-22~199 ° F)
* Dew point temperature range: -30~100 ° C(-22~199 ° F)
* Wet bulb temperature: 0~80 ° C(32~176 ° F)
* Humidity accuracy: +/-2%RH(at 25 ° C, 20~80%RH); +/- 2.5%RH(at other range)
* Air temperature: +/-0.5 ° C ;+/- 0.9F(at 25C)
* Accuracy: +_0.8 ° C/+_1.5F(at all range)
* Resolution: 0.01%RH, 0.01 ° C/ 0.01 ° F
* Response time: %RH: 10S (90%at +25 °C still air)
* Operating temperature: 32°F to 104°F (0 °C to 40 °C);<80%RH
* Storage temperature: 14 °F to 140 °F (-10 °C to 60 °C );<70%RH

Thermohygrometer

Thermohygrometer Alat ukur kelembaban udara

Spesifikasi :

Thermohygrometer atau Alat ukur kelembaban udara

Display temperature , humidity and time simultaneously
Memory of MAX &amp; MIN measuring value
– Range :C51
Temperature : -10 to 50 ºC
Humidity : 10% to 99% RH
-Resolution :
Temperature : 0.1ºC (0.1ºF)
Humidity : 1% rH
– Accuracy :
Temperature : ±1ºC (1.8ºF)
Humidity : ±5% RH (40% to 80%RH)
Power 1,5Volt AAA x 1 battery
Size 100W x 108H x 20mmDepth

Sling Hygrometer

Sling Hygrometer

Sling Hygrometer Alat ukur Kelembaban Udara

Range : -5°C to +50°C,
Having 2 red liquid thermometer, wet and dry
graduated every 1/2°,
Red Liquid
Automatic wick wetting.
Sensitive thermometers store.
Built-in slide rule scales for determining relative humidity.
Pocket-sized, 7-1/2″L, 1″ diameter

Thermohygometer

Thermohygometer

Thermohygometer atau Alat ukur kelembaban udara.

Mempunyai dua sensor :

– Sensor Humidity dan Temperature
– Sensor Temperature type K

Temperature Range : -10ºC to 50ºC
K-type range : -20ºC to 1,000ºC
Relative humidity range : 5.0% to 98% rH
Accuracy :
– Temperature ± 1ºC
– rH : ± 3%
Resolusi :
– Temperature ± 0.1ºC
– K-type : 1ºC
– rH : 0.1%rH
Operation Condition : -10ºC to 50ºC

Lascar Electronics EasyLog USB Humidity

Lascar Electronics EasyLog USB Humidity

Lascar Electronics EasyLog USB Humidity, Temperature, and Dew Point Data Logger

Features a high contrast LCD that displays current readings and the maximum and minimum stored values among the 16,379 relative humidity and temperature readings.
Lascar’s EasyLog data loggers are the world’s first direct USB data loggers, providing a cost effective, easy-to-use method of measurement! Each logger measures relative humidity and temperature and also provides dew point indication using the included software. User-programmable alarm thresholds for % RH and temperature. Status indication via red and green LEDs. Environmental protection to IP67 standard when protective cap is fitted. Data logger, software, and battery included.

Specifications lascar electronic easylog USB humidity :
Range: 0 to 100%
RH; -35°C to +80°C (-31°F to +176°F).
Accuracy: Typical, ±3% RH, ±0.5°C (±1°F);
Maximum, ±5.0% RH, ±2°C (±4°F).
Interface: USB

Thermometer

Thermometer 

Spesifikasi :

Alat ukur temperatur pada cairan, benda lunak, tanah, kompos, makanan, dll

Temperature.
Range : – 50ºC to 300ºC, – 58ºF to 572ºF
Power : 1 x 1.5V
Dimensions : 129(L) ×18(W) × 18(D)mm
Weight : 58g approx.
ºC or ºF can be selected
Sharp and sensitive probe
Protective plastic sheath
Water-proof

Thermometer  1 channel

Thermometer 1 Channel

Thermometer atau Alat ukur suhu 1 channel
Digital K Type Thermometers
3 1/2 LCD Display
Measuring Range :
-50 to 1300ºC
-50 to 1999ºF
ºC / ºF Function
Data Hold Function
Dimension : 155mmL x 72mmWx35mmH
Weight : 175gr
Battery: 4Pcs / 1,5Volt size AAA (life 80 hour)
Ambient Operating Range : 0 to 50ºC
Accuracy : ±0.2%+ 2ºC, Resolution 0.1ºC (-50 to 199.9ºC)

Sensor probe :
TPK01 Bead probe -50ºC to 200ºC , 100 cm length cable

Thermometer Digital  4 channel

Thermometer Digital 4 Channel

Alat ukur suhu/temperature 4 channel
LCD display with backlight
Type K Thermocouple Input
Dual Thermocouple Input
Max Hold and Data Hold
User Selectable: ºC or ºF
User Selectable: 0.1 ºC or 1 ºC( 0.1 ºF or 1 ºF) Resolution
Scan Function: (T1,t2,t3,t4,max,Hold..)
Range: -200 ºC to 1372 ºC(-328 ºF to 2501 ºF)
T1,T2,T3,T4 Above -100 ºC: (-148 ºF), ±[0.15%rgd+1 ºC(1.8 ºF)]
T1,T2,T3,T4Blow -100 ºC: (-148 ºF), ±[0.5%rgd+2 ºC(3.6 ºF)]
Type K Temperature Resolution: 0.1 ºC/ ºF/ k<1000 º;1 ºC / ºF/k>1000 º
Size(HxWxD) 200mm×85mm×40mm
Weight 230g
Accessories 9V battery ,black bag,manual
blister card and Type K probe

IR Thermometer

IR Thermometer Alat ukur suhu/temperature Infra merah sampai 530⁰C

IR Thermometer Alat ukur suhu/temperature Infra merah sampai 530⁰C
Range : -32º C~530º C (-25.6º F~986º F)
Distance to spot size 12: 1
Dimensions : 185*135*28mm
Weight : 178
Temperature range: -32⁰ C~530⁰ C (-25.6⁰ F~986⁰ F)
Display in Celsius or Fahrenheit
Emissivity 0.95
Laser sight : single
Resolustion 0.1⁰C of 0.1⁰ F
Repeatability 1% or 1⁰C (1.8⁰F)
Spectral response 8~14um
Response time 500ms, 95% response
Power: 9V alkaline or NiCd battery

IR Thermometer

IR Thermometer

IR Thermometer -18 ~ 1350°C / 0 ~ 2462°F

Alat ukur suhu/temperature Infra merah sampai 1350⁰C
All our products are manufactured under the strict quality control guidelines established by EN ISO9001-2000 Standards
* Measuring Range: -18 ~ 1350°C / 0 ~ 2462°F
* Accuracy:
0 ~ 1350°C (32~2462°F) : ±1.5°C (±2.7°F) or ± 1.5%
0~ 18°C (0~32°F) : ±3°C (±5°F) whichever is greater
* Distance to Spot Size / DS Ratio: 50:1
* Resolution: 0.1 °C/°F
* Repeatability: 1% of reading or 1°C
* Response Time: 500mSec, 95% response
* Spectral Response: 8~14µm
* Emissivity: User Adjustable and Preset at 0.95
* Laser Power: <1 mW
* Operating Environment : Temperature: 0~40°C (32~104°F)
* Humidity: 10~95% R.H. non-condensing at up to 30°C (86°F)
* Storage Temperature: -20~60°C (-4~140°F)
* Low battery indication (3 levels)
* Power: 1 x 9V Battery (included)
* Typical Battery Life (Alkaline): 12 hours (Laser), 22 hours (non-Laser)
* Item Size: approx. 141 x 60 x 200mm
* Item Weight: approx. 270g

 

Alat untuk melihat gambaran panas pada suatu benda

Flir® E-8 Thermal Imaging Cameras

Alat untuk melihat gambaran panas pada suatu benda atau Flir® E-8 Thermal Imaging Cameras
Pixels: 76,800 (320 x 240).
Thermal Sensitivity: <0.06°C.
Measurement Modes: Spot (center), area box (min/max), and isotherm (above/below) modes.
Also features picture-in-picture image mode.
Includes an extra battery and external battery charger.

Specifications
Accuracy: ±2% or 2°C.
Emissivity Correction: Variable from 0.1 to 1.0.
Temperature Range: -4°F to 482°F (-20°C to 250°C).
IR Resolution: 320 × 240
Screen: 3inch, 320×240 color LCD
Battery Type: Li-Ion.
Battery Life: 4 hours.
Weight: 1.27 lbs.

Durac Digital Max atau MinThermometer

 Durac Digital Max atau MinThermometer

Displays current, maximum, and minimum temperatures. Reset the maximum and minimum temperatures with the press of a button.

The weatherproof design allows for use indoors or outdoors. Features keyhole mounting.
Two AAA batteries included.
Specifications
Range: 14°F to 122°F (-10°C to 50°C).
Resolution: 0.1°.
Accuracy: ±1.8°F (±1°C).

Oakton® Hygrometer atau Thermometer

Oakton® Hygrometer/Thermometer

Alat monitor suhu dan kelembaban udara
°Fahrenheit / °Celsius
Monitor temperature and humidity conditions with one unit! Digital model uses a solid state temperature detector.

Specifications
Temperature Range: -18C° to +72°C/0°F to 160°F
Humidity Range: 20% to 100% RH,.
Resolution: 2% RH, 0.1°F or °C.
Accuracy: ±4% RH, Full Scale, ±1.8°F/±1°C.
RH response: 90% in 1 minute.
Power: AA 1.5-V battery
Size: 1.1”D x 5” diameter.

Taylor  Mason’s Hygrometer

Taylor Mason’s Hygrometer

Alat monitor suhu dan kelembaban udara
°Fahrenheit
hermometers mounted on a plastic case.
Relative humidity table included.
Permacolor™-filled tubes.

Specifications
Temperature Range: 0°F to 120°F.
Graduations: every 2°.
Dimensions: 10” x 4”.

Stainless Steel Vernier

Stainless Steel Vernier

Spesifikasi :

Alat ukur ketebalan dan rongga
English/Metric

Measuring capacity 6”/150 mm.
Overall length 8”.
For outside, inside, and depth measurements.
Accuracy lower scale ±0.001”,
upper scale accuracy to ±0.05 mm.
Cam lock.
Jaw length is 1-9/16”.

 

Ultrasonic Thickness Gauge

Ultrasonic Thickness Gauge

Microprocessor KMTM8812 – Ultrasonic Thickness Gauge

Alat ukur ketebalan: (Besi, Aluminum, Kaca,
Stainless, Plastic, Copper, dll)

Material Measured :
– Any Hard Materials including Steel., Cast Iron, Aluminum, Red Copper, Brass, Zinc, Quartz Glass, Polyethylene, PVC, Gray, Cast Iron, Modular Cast Iron, and other materials.
Measuring Range : 1.2mm to 225 mm (0.05 to 9 inch)

Sound Velocity : 500 to 9000 m/s
Low Limit Steel Pipe : Dia 15 x 2.0mm, Dia 20 x3.0mm, determined by the transducer
Calibration Block : Included
Accuracy : ± 0.5%n + 0.1
RS 232C Interface
Power Supply : 4 x 1.5 Volt AAA
Battery Indicator : Low Battery Indicator
Operating Conditions : 0 to 40ºC / 10 to 90%RH
Dimension : 120 x 62 x 30 mm
Weight 164 gr excluding battery

Optional :
a. High Temp. Probe : 5M dia 12, (-10ºC to 300ºC)
Range (steel) : 4.0 to 100.0 mm
b. Cable and Software for RS232C Interface
Standard Delivery :
– Main Unit = 1 unit
– 5M Dia 10 Transducer = 1 unit
– Couplant : 1 bottle
– Instruction Manual
– Carrying Case

Ultrasonic Thickness Gauge

Intell Instruments Ultrasonic Thickness Gauge

“Alat ukur ketebalan: (Besi, Aluminum, Kaca,
Stainless, Plastic, Copper, dll)”
SPECIFICATION
Measuring Range: 1.0-300mm(steel)
Accuracy: ±(1%±0.1)mm
Sound Velocity Range: 1-9999m/s
Pipe Measuring Lower Limit: φ20*3mm(steel)
Working Frequency: 5MHz
Working Temperature Range: 0-45℃
Automatic Zero Adjustment
Data Store Function
Low Battery Indication
Auto Power Shut Off
Product Size: 70*145.5*28mm
Net weight Ultrasonic Thickness Gauge : 210g

 

Ultrasonic Thickness Gauge

Ultrasonic Thickness Gauge

Alat ukur ketebalan (besi, kaca, plastik, stainless,dll)

Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Switch to select English or metric units.
Resolution: 0.001 inch (0.01 millimeter)
Velocity Range: .0492 to .3937 in/m s
1250 to 10,000 meters/sec
Alarm Mode: Enter a minimum acceptable thickness value.
Data Ouput: RS232 output sends thickness readings to a computer or other external storage device
Size: 63.5 W x 120.7 H x 31.8 D mm
Weight Ultrasonic Thickness Gauge : 10 ounces

Ultrasonic Thickness Gauge
Ultrasonic Thickness Gauge

Alat ukur ketebalan (besi, kaca, plastik, stainless,dll)

Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters) – Tanpa mengupas cat
Switch to select English or metric units.
Resolution: 0.001 inch (0.01 millimeter)
Velocity Range: .0492 to .3937 in/m s
1250 to 10,000 meters/sec
Alarm Mode: Enter a minimum acceptable thickness value.
Data Ouput: RS232 output sends thickness readings to a computer or other external storage device
Size: 63.5 W x 120.7 H x 31.8 D mm
Weight: 10 ounces

 

Ultrasonic Thickness Gauge
Ultrasonic Thickness Gauge

Alat ukur ketebalan (besi, kaca, plastik, stainless,dll)
Range:Measures from 0.15 to 25.4 mm
(Tanpa mengupas cat)
Resolution: 0.001 mm
Velocity Range: 1250 to 10,000 meters/second
Measuring Mode: Interface to Echo, Echo-to-Echo (through paint) and Auto-Switchable
Operating Temperature: -30° to 50°C
Size: 63.5 W x 114.3 H x 31.5 D mm
Weight: 10 ounces (with batteries)
Data Output: RS-232

 

Underwater Ultrasonic Thickness Gauge

Underwater Ultrasonic Thickness Gauge

Alat ukur ketebalan material dan coating di dalam air

Range:Pulse-Echo Mode (P-E): (Pit&Flaw Detection)
measures from 0.025 19.999 inches (0.63 to 500 millimeters).
Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 500 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
Echo-Echo Mode (E-E): Thru Paint & Coatings) measures from 0.100 to 4.0 inches (2.54 to 102 millimeters). Range will vary +/- depending on the coating.
Triple-Echo Mode (TCG): Thru Paint&Coatings) measures from 0.040 to 6.0 inches (1 to 150 millimeters) in steel. Range will vary based on coating thickness, material type, and probe.
Resolution: +/- .001 inches (0.01 mm)
Velocity Range: .0492 to .5510 in./µs 1250 to 13995 meters/sec
Weight: 1.5 lbs (0.680kg) – with 3 AA batteries.
Size Underwater Ultrasonic Thickness Gauge : Length (9.0 in/229 mm)
Diameter (2.375 in/60.33 mm)
Operating Temperature: -20° to 140°F (-29° to 60°C).
Keyboard: Single button, magnetically coupled switch.
Underwater Case: High strength transparent plastic housing. Depth rating of 1000 feet (300 meters).
Data Output: Bi-directional RS232 serial port, with USB converter. Windows® PC interface software.

Coating Thickness Gauge
Coating Thickness Gauge

Alat ukur ketebalan cat di permukaan logam ferro atau
non ferro
Specification:
Display: 4 digits LCD, backlit
Range: 0 – 2000 μm / 0 – 80mil
(other ranges can be specified )
Min.radius workpiece: F: Convex 1.5mm/Concave 25mm
N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mm
Min.Sample thickness : 0.3mm
Resolution: 0.1 μm (0~99.9μm);
1 μm (over 100μm)
Accuracy: ±1~3%n or 2.5 μm or 0.1mil (Whichever is the greater)
Battery Indicator: Low battery indicator.
PC interface: with RS-232C interface
Power supply: 2×1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50℃ .
Humidity <95% .
Size: 126x65x35 mm; 5.0×2.6×1.6 inch
Weight Coating Thickness Gauge : about 81g(not including batteries)

Standard accessories:
Carrying case ……………….1 pc.
Operation manual ………… 1 pc.
F probe in built ……………..1 pc.
NF probe in built……………1 pc.
Calibration foils …………..1set.
Substrate (Iron) …………….1 pc.
Substrate (Aluminium)……1 pc.

Optional accessories:
1.USB adaptor for RS-232C
2.Bluetooth interface

 

Standard accessories:
Carrying case ……………….1 pc.
Operation manual ………… 1 pc.
F probe……………………….1 pc.
NF probe…………………….1 pc.
Calibration foils …………..1set.
Substrate (Iron) …………….1 pc.
Substrate (Aluminium)……1 pc.

Optional accessories:
1.USB adaptor for RS-232C
2.Bluetooth interface

 

Coating Thickness Gauge
Alat ukur ketebalan cat di permukaan logam ferro atau non ferro

Alat ukur ketebalan cat di permukaan logam Coating Thickness Gauge ferro dan
non ferro
Flip Display will allow you to read the meter in any position!
Factory calibrated, measures precisely right out of the box
Simple switch between mils or microns
Large LCD flip-display, easy to read in any position
Accurate readout in just 1 second
Memory records the last 10 measurements

Specifications:
Measurement Range: 0 – 40 mil
: 0 – 1000 µm (micron)
Accuracy: ± (0.1 mils + 3%)
: ± (2 µm + 3%)
Memory: 10 measurements
Weight: 2.6 oz / 72g
Dimensions : 10.7 x 4.5 x 2.5 cm

Included: battery, (1x AAA)
stable case
4 calibration films
calibration target iron and aluminum
English manual

 

Coating Thickness Gage
Alat Ukur ketebalan cat

ELCOMETER 456 (NEW) – Coating Thickness Gage Alat Ukur ketebalan cat

Range: 0-1500μm (0-60mils)
Accuracy : ±1-3% or ±2.5μm (±0.1mil)
Resolution: 0.1μm: 0-100μm; 1μm: 100-1500μm
0.01mil: 0-5mils; 0.1mil: 5-60mils
Display information 2.4″” (6cm) QVGA colour TFT display, 320 x 240 pixels
Battery type 2 x AA dry cell batteries,
Battery life 5 ~24 hours of continuous use at 1 reading per second
Gauge dimensions: 140 x 72 x 45mmGauge weight 154g (5.43oz)”
Elcometer 456 Ferrous Integral
Elcometer 456 Ferrous Separate (w/ Cabled probe)
Elcometer 456 Ferrous Non Ferrous Integral
Elcometer 456 Ferrous Non Ferrous Separate (w/ Cabled probe)

 

Wood Coating thickness gauge
Wood Coating thickness gauge

Alat ukur ketebalan cat di permukaan kayu
Polymer coatings on wood, plastic, etc.
Range:13 – 1000 microns
0.5 – 40 mils
Measures:Total Thickness
Accuracy:± (2 microns + 3% of reading)
± (0.1 mils + 3% of reading)
Size:146 x 64 x 31 mm
(5.75″ x 2.5″ x 1.2″)
Weight: 165 g (5.8 oz.) without batteries
Conforms to ASTM D6132 and ISO 2808

ALL GAGES COME COMPLETE with probe, precision plastic shims, protective rubber holster with belt clip, couplant, 3 AAA batteries, instructions, nylon carrying case with shoulder strap

Concrete Coating thickness gauge
Concrete Coating thickness gauge

Alat ukur ketebalan cat di permukaan beton/Concrete
Thicker coatings on concrete, fiberglass, etc.
Range:50 – 3800 microns
2 – 150 mils
Measures:Total Thickness
Accuracy:± (2 microns + 3% of reading)
± (0.1 mils + 3% of reading)
Size:146 x 64 x 31 mm
(5.75″ x 2.5″ x 1.2″)
Weight: 165 g (5.8 oz.) without batteries
Conforms to ASTM D6132 and ISO 2808

ALL GAGES COME COMPLETE with probe, precision plastic shims, protective rubber holster with belt clip, couplant, 3 AAA batteries, instructions, nylon carrying case with shoulder strap

Elcometer 236 DC Holiday Detector
Elcometer 236 DC Holiday Detector

Alat untuk mendeteksi kesempurnaan coating
This instrument performs high voltage testing to detect pits, holes, flaws etc. in coatings.

The Elcometer 236’s convenient carry case allows the probe handle and accessories to be attached to the front making the Elcometer 236 ideal for field, site or laboratory inspection.

An accessory pouch, which accommodates the additional rechargeable battery (optional) can also be attached to the soft carry case – thereby extending inspection time without the need for recharging the unit.
Robust and fully portable
Audio and visual alarms for noisy environments
Supplied with a band brush probe
Digital display of output voltage or current
Adjustable sensitivity
15kV and 30kV options available with fully adjustable output voltage
The Elcometer 236 is available in two versions:”
0.5 – 15kV
0.5 – 30kV.
Each unit provides the user with complete control of voltage and sensitivity settings.

 

Flaw Detector
Flaw Detector

Alat inspeksi hasil pengelasan
specification flaw detector :

Range: 1mm to 10m at steel velocity, range selectable in fixed steps or continuously variable
Material Velocity: Continuously adjustable from 1000 to 9999 m/s, 7 selectable material velocities
Display Delay: -5 to 3400 us in steel (dependent on range)
Probe Delay/Zero Offset: 0 to 99.999 us
Damping: 50, 75, 150, 500 ohms
Gain: 0.0 to 110.0 dB adjustable in selectable steps 0.2, 0.5, 1.0, 2.0, 6.0, 12.0, user definable, and locked
Test Modes: Pulse echo, dual, and thru-transmission Pulser
Square wave excitation pulse
Pulse Voltage: (Square wave pulser mode)
50 to 500 V scrollable in 10 V adjustments
Pulse Width: (Square wave pulser mode)
Tunable from 50 to 1000 ns in 10 ns adjustments
Pulse Energy (Spike mode): Low, Medium, High
Pulse Repetition Frequency: Automatically adjust from 25 to 1500 Hz
Bandwidth: 0.4 to 25 MHz with 3 selectable settings including broadband
Gate Monitors: Two independent flaw gates controllable over entire sweep range
Measurement Modes: Zero-to-first, multi-echo with selectable flank or peak detection

Rectification: Positive half-wave, negative half-wave, full-wave, RF
Reject (suppression): 0 to 90% linear
Units: Inch, millimeter
Operating Temperature: 0 C to 55 C operating, -25 C to 70 C storable
Languages: English
Probe Connectors: BNC or LEMO
Keypad: International symbols
Battery Life: 6 hours
Size: 302mmX251mmX51mm
Weight: 2.4kg with battery

Vibration Meter
Vibration Meter

Alat ukur getaran mesin
Display : 4 digit LCD backlit
Accuracy : 5% of reading + 2 digits
Measurement Range :
Displacement : 0.001-4.000mm
Equivalent Peak-Peak ; 0.04-160.0 mil ,
Acceleration : 0.1-400.0 m/s
Equivalent Peak ; 0.3-1312 ft/s ; 0.0-40g
Velocity : 0.01-400.0 mm/s
True RMS ; 0.000-16.00 inch/s
Frequency Range :
Displacement : 10Hz. ~ 10kHz.
Acceleration : 10Hz. ~ 10kHz
Velocity :10Hz. ~10kHz.
Metric/ Imperial conversion
Analogue Output : AC output 0~2.0V peak full
scale(load resistance: above 10k)
With Max. value hold and low battery
indication.
PC interface : RS232C ( Cable and software
is not included)
Power off : Manual off at any time or auto
power off is enabled by user
Operating conditions :
Temperature : 0-50 C
Humidity : below 95% RH
Power supply : 4×1.5vAA (UM-4)Battery
Size : 140x70x30mm
Weight : 130g (Not including Batteries)

 

Vibration Meter (3D)
Vibration Meter (3D)

Alat ukur getaran pada mesin

Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
Is pecifically designed for present measuring various mechanical vibration. So as to provde the data for the quality control, run time and equipment upkeep.
Iuse the high-performance acceleration meter, realize the repetitiveness and accurate measurement.
It has the function of testing axle bearing situation.

SPECIFICATIONS
Vibration Sensor:3-Axis Piezoelectric accelerometer
Display: 4 digit LCD backlit
Axial Vibration: any one axis of X ,Y,Z or 3 axes of XYZ
Measurement Range:
Velocity : 0.01-400.0 mm/s 0.000-16.00 inch/s true RMS
Acceleration : 0.1-400.0 m/s² 0.3-1312 ft/s² 0.0-40g equivalent peak
Displacement : 0.001-4.000mm 0.04-160.0 mil equivalent peak-peak

Frequency Range for Measuring:10Hz. to 10kHz.
Accuracy: 5% of reading + 2 digits
Metric/ Imperial conversion
Analogue Output: AC output 0~2.0V peak full scale
(load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C or Bluetooth interface
( Cable and software is not included)
Power supply: 2×1.5v AA size (UM-3) batteries
Power off : Manual off at any time or auto power off is enabled by user
Operating conditions:
Temperature : 0-50 ℃
Humidity : below 95% RH
Dimensions: 124x62x30mm/4.9×2.4×1.2 inch
Weight: 120g (not including batteries)
Accessories included :
Powerful rare earth magnet 1 pc.
Accelerometer 1 pc.
Stinger probe (Cone) 1 pc.
Stinger probe (Ball) 1 pc.
Carrying case 1 pc.
Operation manual 1 pc.
Optional accessories: Headphones for use as electronic stethoscope
Cable and software for RS232C

 

Leeb Hardness Tester
Leeb Hardness Tester

Spesifikasi

Alat Uji Kekerasan Besi
Display: 12.5mm LCD with back light
Accuracy: Display error ±0.8% at LD=900
Range: 200-900L
Conversion: HL-HRC-HRB-HB-HV-HSD
Materials: 9 different common materials
With RS232C interface
Memory: 250 data can be stored and re-readable
Impact device: D Will handle the majority of hardness testing
Weight: 75g
Power supply: 2×1.5V AAA size battery
Dimension: 146×65×36mm
Weight: 130g (not including batteries)
Working temp.: – 10ºC up to 50ºC
Storage temp. : – 30ºC + – [Returns]

Leeb Hardness Tester
Leeb Hardness Tester

Alat Uji Kekerasan Besi
Technical Specifications
Display: 12.5mm LCD with back light
Accuracy: Display error ±0.8% at LD=900
Measuring range: 200-900L
Conversion: HL-HRC-HRB-HB-HV-HSD
Materials: 9 different common materials
With RS232C interface
Memory: 50 data can be stored and re-readable
Impact device: D Will handle the majority of hardness testing
applications
Working temperature: – 10℃~+50℃
Storage temperature:- 30℃~+
Weight: 75g
Power supply: 4×1.5V AAA size battery
Dimension: 130×62×30mm
Weight: 162g (not including batteries)

 

Gloss Meter
Gloss Meter

Alat ukur kilap permukaan
Specification:
Display:4 digits backlit LCD
Measuring geometry: 20/60 Degrees
Range: 0.1 to 200 gloss units
Accuracy:±1.0 gloss unit
( against reference standard )
Resolution: 0.1 gloss unit
Repeatability: ±0.5 GU(0 … 99.9)
Measuring area: mm ellipse
Data memorized: groups
Data output: RS 232 C serial interface
Power supply: battery:4×1.5VAAA
Dimensions:
main unit:156 x67x28mm
Separate sensor:58x28x108mm
Weight:about 350g ( including fitted batteries )
Working condition:
Temperature range 0 – 40℃
Humidity up to 85%

Gloss Meter (Alat ukur kilap permukaan)

Alat ukur kilap permukaan
Specification:
Display:4 digits backlit LCD
Measuring geometry:20/60/85 Degrees
Range: 0.1 to 200 gloss units
Accuracy:±1.0 gloss unit
( against reference standard )
Resolution: 0.1 gloss unit
Repeatability: ±0.5 GU(0 … 99.9)
Measuring area: mm ellipse
Data memorized: groups
Data output: RS 232 C serial interface
Power supply: battery:4×1.5VAAA
Dimensions:
main unit:156 x67x28mm
Separate sensor:58x28x108mm
Weight:about 305g ( including fitted batteries )
Working condition:
Temperature range 0 – 40℃
Humidity up to 85%

Digital Surface Profile Gauge
Digital Surface Profile Gauge

Alat ukur profil permukaan
Applications: Specially used to take accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces.
Specifications digital surface profile gauge
Display : 4 digits, LCD
Range: 0 µm to 800 µm (0 mils to 30 mils)
Accuracy: ±5% or ±5 µm,(whichever is the greater)
Resolution: 1 µm (0.1 mils)
Metric and Imperial switchable
PC interface: RS232C
Measurement speed: >30 readings per minute
Weight: 280 g
Dimensions: 162 x 65x 28 mm (6.4 x 2.6 x 1.1 inch)
Operating temperature: 0°C to 50°C, <80%RH
Case: High impact ABS
Batteries: 4 x 1.5v (AAA) battery
included : Carrying case: 1 pc.
Operation manual 1 pc.
Optional: Cable and software for RS232C

Surface Roughness Tester
Surface Roughness Tester

Alat ukur profil permukaan
SPECIFICATIONS
Display: 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz, Rq, Rt
Measuring Range
Ra, Rq: 0.005-16.00um/0.020-629.9uinch
Rz,Rt: 0.020-160.0um/0.780-6299uinch
Accuracy: ≤±10%
Fluctuation of display value: Not more than 6%
Sensor :
Test Principle: Inductance type
Radius of Probe Pin: 5um
Material of Probe Pin: Diamond
Dynamo-measurement of Probe: 4mN(0.4gf)
Probe Angle: 90°
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Evaluation length: 5l
Driving speed:
sampling length = 0.25mm Vt=0.135mm/s
sampling length = 0.8mm Vt=0.5mm/s
sampling length = 2.5mm Vt=1mm/s
returning Vt=1mm/s
Profile digital filter
Filtered Profile: RC
Filtered Profile: PC-RC
Filtered Profile: Gauss
Non-Filtered Profile: D-P
Resolution : .001μm if reading <10μm
0.01μm if 10μm≤reading<100μm
0.1μm if reading ≥100μm
Evaluation length : 5 cut-off
Power Li-ion battery: rechargeable
Operating conditions: Temp. 0~50℃
Humidity <80%
Size:140x57x48 mm (5.5×2.2×1.9 inch)
Weight: about 420 g
Attachment:
Standard Sensor RP-100
Groove Stylus SRP-110
curvature Probe SRP-120
Extension Rod SER-150
Mesurement Stand SRS-1
Standard Sample Plate SSP-180
Cable and Software for RS-232/USB)
Bluetooth interface

 

HARDNESS TESTER 6510 SHORE D
HARDNESS TESTER 6510 SHORE D

Alat ukur tingkat kekerasan plastik seperti hard resin,
formica, epoxi, flexiglass, dll
Used for measurement hardness of the plastic. For example: Thermoplastic, hard resin, the bowling. Especially suitable for the scene hardness measurement of the rubber and plastic finished product, plastic, formica, epoxies, flexiglass.

SPECIFICATIONS hardness tester 6510 shore D
Measurement Range: 0~90HA (HC, HD)
Accuracy :<= 1%
Resolution: 0.1H
Standards: DIN53505, ASTMD2240, ISO7619, JISK7215
Auto switch off
Low battery indicator
With RS232 interface

Power supply: 4×1.5v AAA (UM-4) Battery
Dimensions: 162x65x28mm
Weight: 173g (not including battery)

Standard delivery: Main Unit, Carrying case, User’s Manual
Optional Accessories: Cable & software for RS232C interface

HARDNESS TESTER – 6510A SHORE A
HARDNESS TESTER – 6510A SHORE A

Alat ukur tingkat kekerasan plastik, karet, karet sintetik,
neoprene, silikon, kulit vinyl, dll
Used for measuring hardness of the soft plastics, the rubber, synthetic rubber, the felt, neoprene, silikon, vinyl leather and the glue rod

SPECIFICATIONS

Measurement Range: 0~90HA (HC, HD)
Accuracy :< 1%
Resolution: 0.1H
Standards: DIN53505, ASTMD2240, ISO7619, JISK7215
Auto switch off
Low battery indicator
With RS232 interface

Power supply: 4×1.5v AAA (UM-4) Battery
Dimensions: 162x65x28mm
Weight: 173g (not including battery)

Standard delivery: Main Unit, Carrying case, User’s Manual
Optional Accessories: Cable & software for RS232C interface

HARDNESS TESTER 6510 SHORE C
HARDNESS TESTER 6510 SHORE C

Alat ukur tingkat kekerasan foam, spons dan material
lembut lainnya

Used for measuring hardness foams, the sponge and soft material.

SPECIFICATIONS
Measurement Range: 0~90HA (HC, HD)
Accuracy :< 1%
Resolution: 0.1H
Standards: DIN53505, ASTMD2240, ISO7619, JISK7215
Auto switch off
Low battery indicator
With RS232 interface

Power supply: 4×1.5v AAA (UM-4) Battery
Dimensions: 162x65x28mm
Weight: 173g (not including battery)

Standard delivery: Main Unit, Carrying case, User’s Manual
Optional Accessories: Cable & software for RS232C interface

Analogue Force Gauge
Analogue Force Gauge

Alat untuk mengukur kuat tarik dan tekan
Easy operation, hand-holding design and being installed with various test stands and clamps;
Peak holding and tracking;
Needle indication,easy reading and high accuracy;
Tolerance limit indication,can set upper and lower limits;
Two units(N, kg)show on the dial at the same time;
Patent number:ZL200520074355.1.

Model : SN Series
Capacity : 10N, 20N, 30N, 50N, 100N, 200N, 300N, 500N
Accuracy : ± 1%FS
Dimension : 232 x 60 x 51 mm
Weight : ± 0.6kg

DIGITAL FORCE GAUGE
DIGITAL FORCE GAUGE

Product Name:SH Force Gauge
SH Series has its own characters, with facility, high resolution, which can be used not only for simple measurement of tension/compression force but also used for various testing purpose; such as switch test, connector insertion/withdraw test, and fracture test, is efficient push pull testing equipment in a new generation.

Model : SH series
Capacity : 2N, 5N, 10N, 20N, 50N, 100N, 200N, 500N
Sensor Conformation : ( Sensor Inside )
Range : 10%~100%FS
Inaccuracy : ± 0.5% ( Inside )
Power and Using : 8.4V 1.2Vx7 ( Nickel hydride battery, can be used 40 hours when charged fully, standby time ahout 3 months,battery life )
Adaptor : ( Input ) : AC 220V 300 mA ( Output ) : DC 12V 300 mA
Weight : ( About ) 0.7 kg

 

SPJ Manual Test Stand
SPJ Manual Test Stand

Spesifikasi

SPJ Manual Test Stand, applied with push pull force gauge, is specialized in tension/compression, insertion/withdraw and fracture test in every trade and scientific research organization. With gear drive and manual operation,adjustable test stand can be moved up and down to set orientation.Simpleness, stability, expeditiousness and appreciating batch test.
rait:
Dimension: L*W*H(mm) 152*235*425;
Weight: about 10.4kg;
Capacity: 500N;
Stroke: 70mm;
Applied with(purchase additionally): SN、SH/SP (Sensor Inside) push pull force gauge, various clamps.

 

KEYSTROKE TEST STAND
KEYSTROKE TEST STAND

Capacity: 100N;
Stroke: 25mm;
Applied with (purchase additionally): SH-2F, SH-10F, SH-20F, SH-100F

Model : SPF

 

Manual Superficial Rockwell Hardness Tester
Manual Superficial Rockwell Hardness Tester

Alat ukur kekerasan skala Rockwell
Rockwell Scales: HR15N,HR30N,HR45N,HR15T,HR30T,HR45T
Preliminary Test Force: 3Kgf(29.42N)
Test Force: 15Kgf(147.1N),30Kgf(294.2N),45Kgf(441.3N)
Dwell Time: Adjustable 1-60s
Hardness Indication: Analogue Display
Resolution: 0.5HR
Loading Control: Manual
Max. Height Of Specimen: 175mm
Instrument Throat: 165mm
Dimension(LxWxH): 520 x215 x700mm
Packing Dimension: 630 x440 x960mm
Gross/Net Weight: 120Kg/90Kg
Execution Standard: GB/T230.2, JJG112, EN-ISO 6508 , ASTME-18

Digital Superficial Twin Rockwell Hardness Tester( Alat ukur kekerasan skala Rockwell )
Manual Superficial Rockwell Hardness Tester

Alat ukur kekerasan skala Rockwell
Rockwell Scales: HR15N,HR30N,HR45N,HR15T,HR30T,HR45T
Preliminary Test Force: 3Kgf(29.42N)
Test Force: 15Kgf(147.1N),30Kgf(294.2N),45Kgf(441.3N)
Dwell Time: Adjustable 1-60s
Hardness Indication: Analogue Display
Resolution: 0.5HR
Loading Control: Manual
Max. Height Of Specimen: 175mm
Instrument Throat: 165mm
Dimension(LxWxH): 520 x215 x700mm
Packing Dimension: 630 x440 x960mm
Gross/Net Weight: 120Kg/90Kg
Execution Standard: GB/T230.2, JJG112, EN-ISO 6508 , ASTME-18

Digital Foam Tester
Digital Foam Tester

Alat Ukur kekerasan Foam
SPECIFICATIONS
Display: 4 digits, 10mm LCD
With color coded LED indication
Green LED represents a safe, air-dry state.
Yellow LED represents a borderline State.
Red LED represents a damp state.
Measurement Range:0~200%
Accuracy: ±(0.5%n +0.5)
Resolution: 0.1
Penetration depth: up to 50mm
PC interface: RS232C interface
Power supply: 4×1.5 AAA size (UM-4) battery
Power off : 2 modes
Manual off at any time
Auto power off after 5 minutes from last
key operation
Operating conditions:
Temperature : 0-50 ºC
Humidity : below 90% RH
Dimensions:
165x62x26mm or 6.5×2.4×1.0 inch
Weight: 119g (not including batteries)
Optional: cable and software for RS232C (USB) interface

PHOTO / TOUCH / SURFACE SPEED TACHOMETER ( Alat untuk mengukur kecepatan putaran )
Alat untuk mengukur kecepatan putaran

Alat untuk mengukur kecepatan putaran
seperti: motor, fan, mesin cuci, mobil, pesawat dll
FEATURES :
– Multifunction, one instrument combines
Photo Tachometer (rpm)
Contact Tachometer (rpm, m/min, ft/min)
– Wide Measuring Range
– The Last Value, Maximum Value, Minimum Value will be automatically stored in memory and can be obtained by pressing MEMORY CALL button
– LCD Display
– Use one chip of Microcomputer LSI circuit and crystal time base to accuractely offer The accuracy measurement

SPECIFICATION :
– Display : 5 digit, 10mm (0.4″) LCD
– Measuring Range :
a. Photo 2,5 to 99,999 rpm
b. Contact Tachometer : 0.5 to 19,999 rpm
c. Surface Speed : 0.05 to 1,999.9 m/min
: 0.2 to 6,560 ft/min
– Resolution :
Tachometer :
a. 0.1 rpm for 2.5 to 999,9 rpm
b. 1 rpm for over 1,000 rpm
Surface Speed :
a. 0.01 m/min over 10m/min
b. 0.1m/min over 100 m/min
c. 0.1 ft/min for 0.1 to 999.9 ft/min
d. 1ft/min over 1,000 ft/min
Accuracy :
a. Tachometer ± 0.05% + 1 rpm
b. Surface Speed : ± 0.05% + 0.03 m/min
Sampling Time :
a. Photo Tachometer 1 sec over 60 rpm
b. Contact Tachometer 1 sec over 15 rpm
Test Range Select : Automation
Battery : 4 x 1.5AA (UM-3) battery
Operating Temperature : 0 to 50ºC
Size : 215 x 65 x 38 mm
Weight : 300 gram

 

ENGINEE TACHOMETER
ENGINEE TACHOMETER

Alat untuk mengukur kecepatan putaran
seperti: motor, fan, mesin cuci, mobil, pesawat dll

Aplication : 2 Cylinder : 1,2,3,4-Cylinder
Aplication : 4 Cylinder : 1,2,3,4,5,6,8-Cylinder
Measuring Range Enginee : 100~20,000 r/min
Measuring Range Laser : 2.5~99,999 r/min
Method : Electromagnetic induction & reflective
Memory : Max / Min / Last Value
Detection Distance : 30 ~ 600 mm
Resolution : 0.1/1
Operation Conditions : 0~40ºC/10~90%RH
Power supply : 2 x 1.5 V AAA
Dimension : 182 x 68 x 38 mm

 

LASER TACHOMETER
LASER TACHOMETER

Alat untuk mengukur kecepatan putaran
seperti: motor, fan, mesin cuci, mobil, pesawat dll
Features:
– Measuring RPM is safe and accuracte without attachment to object
– Wide Measuring Range & high Resolution
– The Last Value, Maximum Value, Minimum Value will be automatically stored in memory and can be display
– LCD Display
– Use one chip of Microcomputer LSI circuit and crystal time base to accuractely offer The accuracy measurement
– Durable and long lasting components, including strong, light weight ABS plastic
SPECIFICATIONS :
– Display : 5 digit, 10mm (0.4″) LCD
– Test Range : 2.5 to 99,999.9 rpm
– Resolution :
0.1 rpm (2.5 to 999 rpm)
1 rpm for over 1,000 rpm
– Accuracy : ± 0.05% + 1 rpm
– Sampling Time : 1 sec over 60 rpm
– Test Range Select : Automatic
– Power 4 x 1.5 V
– Operating Temperature : 0 to 50ºC

DIGITAL STROBOSCOPE KMTC601 (Alat untuk mengukur kecepatan putaran  )
DIGITAL STROBOSCOPE KMTC601

Alat untuk mengukur kecepatan putaran
seperti: motor, fan, mesin cuci, mobil, pesawat dll

No need to halt the object from its rotation
Measurement Range :
KMDT-2350PA : 50~12000FPM
KMDT-2350PB : 50~40000 FPM
KMDT-2350PC : 50~20000 FPM
KMDT-2350PD : 50~30000 FPM
Display : 5, 10mmLED
Accaracy : ± 0.05%n+1d
Resolution : 0.1 FPM (Less 1000 FPM )
1 FPM Over 1000 FPM
Sampling time :0.3second
2 ranges : High and Low
Flash adjust Coarse adjustment, fine adjustment , ×2 and ÷2 for fast check
Triggering Mode Interior/Exterior
Temperature :0~40

 

VIBROTIP Vibration Analyzer
VIBROTIP Vibration Analyzer

Entry-level data collector
VIBROTIP is an extremely rugged and easy-to-use hand-held data collector for five key indicators of machine condition. All sensors are built in, with no cumbersome cables or fragile plugs. VIBCODE (optional) can be used to eliminate mixups of measurement location and type, and OMNITREND PC software automatically archives trend data, issues warnings and alarms and programs VIBROTIP with all desired measurements.
Key features
1 analog measurement channel
Route mode (data collector)
Segment display
Simple 3-key operation
Battery operation
Lightweight (300 g)
Request further details More information

5-in-1 measuring tool
VIBROTIP provides built-in sensors for the 5 most important machine condition parameters:
1. Vibration severity
2. Bearing condition
3. Rotational speed
4. Temperature
5. Pump cavitation

Technical Specifications
– Channels 1x analog:
– Vibration sensors (Current Line Drive – CLD)
Built-in sensors:
– Vibration, Shock pulse & Pump cavitation
– Temperature
– RPM
Meas. range: Velocity: 0 .. 50 mm/s
Shock pulse: -9 .. 80 dBsv
Temperature: -30 .. +270 °C
RPM: 60 .. 30 000 rpm
Dynamic range: 48 dB
Memory: 128 kB
Prot. class: IP 65
Display: LCD: fixed segment
Supply: Battery

VIBEXPERT II Vibration Analyzer
VIBEXPERT II Vibration Analyzer

Analisa getaran pada mesin
Speed: 10 ~ 200,000 rpm
Temperature: -50 ~ +1,000°C
Vibration displacement: 6,000 µm (p-p)*
Vibration velocity: 6,000 mm/s (p-p)*
Vibration acceleration: 6,000 m/s² (p-p)*
Shock pulse (bearing condition): -10~80 dBsv
* applies to LineDrive sensors (1µA/ms-2) & sensors with voltage output (reference: 159,15 Hz)

Laser Alignment
Laser Alignment
Alat bantu untuk mengatur/menyetel keselarasan mesin
Precision laser alignment instantly for hazardous areas and alignment of pumps, motors, gearboxes and compressors.
Laser alignment for intrinsically safe areas
ALIGNEO EX laser shaft alignment system by PRÜFTECHNIK
ALIGNEO EX laser alignment system
An entry level shaft alignment system, intrinsically safe version, whose features can progressively be added as alignment job demands grow
ALIGNEO EX offers both precision alignment and timesaving convenience expected of a laser precision measurement system. Its intuitive operation, well thought-out design and the loaded features make ALIGNEO EX a called for feature in the maintenance world when it comes to the alignment of pumps, motors, gearboxes and compressors.
Standard features
Static measurement mode – requires any 3 of the 8 available 45° measurement positions
UniBeam – for quick adjustment of the single laser beam
Coupling and foot results displayed in both numerical and graphical format
Live monitoring of horizontal or vertical machine corrections
Soft foot check – measure, correct and save results
Alignment of 6-feet machines
Alignment of nonrotatable and uncoupled shafts
Measurements unaffected by coupling backlash
Save up to 10 measurement files
Automatic data protection in case of power interruption
Pre-assembled brackets designed for quick and rigid set-up
Protected against dust, water and grease in compliance with classification IP 65 and IP 67
Inside Micrometer
Inside Micrometer
Alat ukur lebar/diameter sisi dalam
Graduation 0.01mm
Ratchet stop
Carbide measuring faces
Optional accessary: setting ring
“Range Type Setting ring Accuracy
5-30mm A 5mm 5μm
25-50mm B 25mm 6μm
50-75mm B – 7μm
75-100mm C – 8μm
100-125mm C – 9μm
125-150mm C – 9μm
150-175mm C – 10μm
175-200mm C – 10μm
200-225mm C – 11μm
225-250mm C – 11μm
250-275mm C – 12μm
275-300mm C – 12μm
Inside Micrometer
Inside Micrometer
Alat ukur lebar/diameter sisi dalam
Resolution 0.001mm/0.00005″
Button function: on/off, set, mm/inch, ABS/INC, data output
RS232 data output
SR44 or LR44 battery, automatic power off
Ratchet stop
Carbide measuring faces
Optional accessory: SPC cable
setting ring
“Range Type Setting ring Accuracy
5-30mm/0.2-1.2″” A 5mm ±5μm
25-50mm/1-2″” B 25mm ±6μm
50-75mm/2-3″” B — ±7μm
75-100mm/3-4″” C — ±8μm”
Mechanic Stetoscope
Mechanic Stetoscope
Untuk mengukur getaran pada mesin, perpipaan, tangki, dll
“Measure :
Acceleration: 20.1 ~ 400 m/s²
Velocity: 0.1 ~ 400 m/s
Displacement: 0.001 ~ 4.0 mm
RPM revolution: 5 to 100,000 r/min
Frequency: 0.1 to 10 kHz
Accuracy: < 5% + 2
Battery: 9 Volt
Size: H185 x W68 x D30mm
Weight: ±230gr”
“Integrated accelerometer and digital display
Pocket size dimensions and light weight.
Wide measurement range.
From low frequencies to high frequencies
– unbalanced rotation eqp – Low frequencies
– misalignment – Low frequencies
– Bearing vibrations – High Frequencies
Measures acceleration :
– (m/s² peak),
– velocity (mm/s rms),
– and displacement (mm p-p);
Hold function measurement
Auto power off ”
Optional: – Headphone for use as electronic stethoscope
– Cable and Software for RS232
Fuel Pressure Meter
Fuel Pressure Meter
Fungsi/Kegunaan: menunjukkan tekanan bahan bakar
diesel, dan display digital menunjukkan tekanan
bahan bakar
DIGITAL WELDING GAUGE
DIGITAL WELDING GAUGE
DIGITAL WELDING GAUGE
Abilities:
– Holds either the zero setting or measured value at any position for differential measurements
– Has a serial output to interface with a computer or printer to process data
– Automatically turns on by moving the main scale or by pressing on/OFF Key.
– Automatically turns off after 4 minutes of inactivity… conserving battery power
Features: Measures Butt Weld Reinforcement, measure Throat, LCD Display, IN/MM Switch, Slider Clamp screw, Output Connector, Hold Switch, ON/OFF Switch
Range: Usage 1: 10mm / 0,4″
:Usage 2: 20mm / 0,8″
Resolution: 0,01mm / 0,0005″
Automatic Weld Size Weld Gauge
Automatic Weld Size Weld Gauge
Automatic Weld Size Weld Gauge
For Accurate Calibration of Butt Fillet Type Welds.
Use to:
– Check reinforcement
– Check the throat of Fillet Weld
– Determine the leg size of the Fillet Weld
BRIDGE CAM GAGE
BRIDGE CAM GAGE
BRIDGE CAM GAGE
The following measurements are possible in either inches or millimeters
– Angle of preparation: 0º to 60º
– Excess Weld metal (capping size)
– Depth of undercut
– Depth of Pitting
– Fillet Weld Throat Size
– Fillet Weld Length
– Missalignment (High-Low)
Economy Single Purpose Hi-Lo Welding Gage
Economy Single Purpose Hi-Lo Welding Gage
Economy Single Purpose Hi-Lo Welding Gage
Specifications
• Available in Standard or Metric (specify when ordering)
• Root Weld Space
• Eliminates Rejects – Improves Productivity
• Internal Misalignment
Taper Gauge Sub 28A, 28B, 28
Taper Gauge Sub 28A, 28B, 28C
Taper Gauge Sub 28A
Taper Gauge Sub 28B
Taper Gauge Sub 28C
Lufkin® HI-VIZ® Tapes
Lufkin® HI-VIZ® Tapes
Meteran ukuran 5m
Size: Metric; 5m L x 19mm W;
Top and Bottom graduated in mm & cm.
The Hi-Viz orange case of these tapes makes them easy to find on the job! Features include a rubber cushion case exterior for impact protection and grip, bright yellow blade with clear easy-to-read numerals, toggle lock that holds the blade securely in any position, a cushioned blade return, and a removable belt clip. Convenient size fits easily into most tape holsters.
Lufkin® Closed Reel Yellow Clad Steel Tapes
Lufkin® Closed Reel Yellow Clad Steel Tapes
Meteran kombinasi English/Metric
Combination English/Metric Tapes
Length: 100ft
Graduated on both sides.
The front side is graduated in feet, inches, and 8ths.
Black diamonds appear every 16” on the front side.
The back side is graduated in meters and millimeters.
Foot and meter marks are highlighted in red.
Multifunctional Moisture
Multifunctional Moisture
Alat ukur kadar air pada kayu
Fungsi/Kegunaan: Diterapkan untuk bahan serat kayu, kayu artikel,
tembakau, kertas kapas, bangunan, tanah, dan bahan-bahan serat lainnya
Specification:
Sensing type: Pin type
Wood over 150 species: –
Building moisture (range): –
Measuring range: Moisture: 0-50%
Temp: -10~60˚C
Resolution: 0.1
Display: LCD display
Accuracy: Moisture: ±(0.5%n+1)
Temp: 0.8˚C
Power supply: 4X1.5V AA (UM-3) battery
Battery indicator: Low battery indicator
Dimension: 170X44X25mm
Weight (not including battery): 334g
Standard delivery: main unit: 1
carrying case: B02
instruction manual: 1
separate probe (P25): –
RS232 interface: –
Optional accessories: Moisture standard 18%
Cable & software for RS-232C/USB
Multifunctional Moisture
Multifunctional Moisture
Alat ukur kadar air pada kayu
Fungsi/Kegunaan: Diterapkan untuk bahan serat kayu,
kayu artikel, tembakau, kertas kapas, bangunan, tanah, dan bahan-bahan serat lainnya
Specification:
sensing type: search type
Wood over 150 species: √
Building moisture (range): –
Measuring range: Moisture: 0-80%
Temp: –
Resolution: 0.1
Display: LCD display
Accuracy: Moisture: ±1
Temp: –
Power supply: 4X1.5V AAA (UM-4) battery
Battery indicator: Low battery indicator
Dimension: 220X77X43mm
Weight (not including battery): 193g
Standard delivery: main unit: 1
carrying case: B01
instruction manual: 1
separate probe (P25): –
RS232 interface: –
Optional accessories: Moisture standard 18%
Cable & software for RS-232C/USB
Laser Distance Meter
Laser Distance Meter
Alat ukur jarak dengan laser
SPECIFICATIONS:
Measuring range: 80m(262ft)
Accuracy: ± 2mm( ±0.08inch)
Laser class: Class II
Laser type: 635nm, <1mW
Data record: 99 records
Operating temperature: 0~40℃(32~104℉)
Store temperature: -20~60℃(-4~140℉)
Auto shutdown: after 150 secs
Auto cut off laser: after 20 secs
Storage Humidity: 85%RH
Power supply: 3 x 1.5V AAA batteries( Included)
Dimension: approx. 118 x 54 x 28mm ( 4.65 x 2.13 x 1.10inch)
Weight: approx. 180g (6.35oz) (battery included)
Laser Distance Meter
Laser Distance Meter
Alat ukur jarak dengan laser
Technical data
Measurement Distance: 0.1m~80m; 0.32 in ~262.5 ft
Accuracy: ± 1.5 mm;± 0.06 in
Laser type: 635nm, <1mW, Class II
laser Auto. switch-off: after 0.5 min
Auto off: 3 minutes
Battery Life: 4000times
Power supply: 3*1.5V, AAA
Size: 113*56*30mm
Weight: 140g (batteries included)
Digital Protractor
Digital Protractor
Alat ukur level/sudut
Specification:
Displayed in Degrees (°) or slope (%)
Offer 3 mode selection: 0.1 Degree /0.5 Degree/1Degree
Built-in horizontal and vertical bubble level
Measurement Range 0° ~ +/- 90°
Operating Temperature 0°~40° C
Long Battery Life with 3 minutes auto off
Easy, Clear & Precise Digital Display
Hold Function to freeze display on current reading
Buzzer Sound at 0°, 90° and when you hold a reading.
With magnet on the base
Power supply 2 x 3v Lithium cell (Supplied)
Size: Dimension L(200) x H(42.5) x T(18) mm
Weight approx.: 200g
Color: Black
SmartLaser Protactor
SmartLaser Protactor
Alat ukur level/sudut
Ideal for leveling and aligning all angles on roofs, floors, foundations, walls, landscaping and grading, etc.
Laser beam: bright 635nm is visible indoors or outdoors for over 300’
accuracy: to ±1/4” over 100’.
Angles can be seen 3 ways: degrees, % of slope or pitch (in/ft). Other features
include heavy-duty aluminum frame, durable ABS control module, precision optics, beeps at level and plumb, and automatic shut off.
Softsided carrying case is included.

 

HAMMER TEST
HAMMER TEST
Spesifikasi :
Alat ukur kekerasan beton
Used to obtain an estimate of strength and quality of hardened concrete
Measuring Range: 10 – 60 Mpa
Impact Energy: 2.207 ± 0.1J (0.225Kgf.m)
Length of Spring Stretch: 75 ± 0.3mm
The Static Friction of pointer slider: 0.65N ~ 0.15N
Radius of spherical tip: 25mm ± 1mm
The Average rebound values on steel anvil: 80 + 2
Housing Dimension: Ф 54 x 280mm
Weight: 1kg
Submit to industry standards “JGJ/T23-2001
(Technical Specification for Inspesction of Concrete
Comprehensive Strength by Rebound Method)
Concrete Cylinder Mold
Concrete Cylinder Mold
Ukuran dia 15 cm x 30 cm
Concrete Cube Mold
Concrete Cube Mold
Ukuran 15 cm x 15 cm x 15 cm
Alat Test Slump untuk campuran beton
Alat Test Slump untuk campuran beton
Alat Test Slump untuk campuran beton
Sesuai dengan standard ASTM C-143, AASHTO T-119
Untuk mengetahui nilai slump / workability of concrete di laboratorium maupun lapangan
Alat Terdiri dari :
1 Unit corong
1 unit Besi pengukur, 0-10 cm pengukuran slump
1 unit Plate dasar
1 Unit Scoop
1 Unit Trowel
1 unit brush kawat
1 unit Tamping Rod
Ukuran : L70 x W70 x H50 cm
Berat Kotor ± 30 kg
Concrete Mixer Mesin Molen, Pengaduk Cement
Concrete Mixer Mesin Molen, Pengaduk Cement
Model : KMPM60
Dimension : 960 x 445 x 1000 mm
Gross drum volume : 60 Litre
Dry Weight : 63 kgs, Nominal capacity : 50 Litre
Operating speed : 58 rpm, Gear transmission.
Power Source : Electromotor 1 Hp 1 phase, Rpm 1420
Concrete Mixer Mesin Molen, Pengaduk Cement
concrete mixer mesin melon pengaaduk cement
Model : KMPM500
Dimension : 2300 x 1175 x 1520 mm
Gross drum volume : 500 Litre
Dry Weight : 400 kgs, Nominal capacity : 450 Litre
Drum speed : 24-25 rpm
Mid pulley : 10″ x 3″, Main pulley : 17″
Power source : Diesel engine 8,5 Hp/2200 rpm
Core Drill
Core Drill
Mesin pemotong sample aspal atau beton
Dimension (l x w x h): 97 x 57 x 150 cm
Gross Weight: 145 kg
For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.
Core Drill BI-400A
Dimension (l x w x h): 97 x 57 x 150 cm
Gross Weight: 145 kg
For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.
Core Drilling Machine:
Cast alumunium frame,
gasoline engine 7 HP,
4 cycle
vertical drilling position: rubber caster,
up to 4″ dia. bit 1 Set
Diamond Bit: 4″ inner dia. 1 Pc
Sample Tong: 4″ dia. 1 Pc
Breaking Strip: Galvanized steel, 1 Pc
Spanner : Steel, 42 mm and 32 mm, 2 Pcs
Chipper Hammer
Chipper Hammer
Mesin Penghancur Aspal atau beton
Detail Specifications
Power Input : 1.900 Watt
Impact Energy : 60 J
Impact Rate : 1.030 bpm
Chiseling : 2.700 Kg/ h
Weight : 29 Kg
Leak Detector for Refrigerant Gas ( Alat Deteksi Kebocoran Gas Freon )
Alat Deteksi Kebocoran Gas Freon
Alat Deteksi Kebocoran Gas Freon
Halogenated Refrigrants Gas Detectors
LED Leak Size Indicators
Two Sensitivity positions, including our unique ScanMode
Reset Button for instant re-calibration
Detachable probe
High efficiency pump
Detects ALL Halogenated Refrigerants, including R-410A, CFCs : R11, R12, R5000, R503, HCFCs : R22, R123, R124, R502, HFCSs : R134a, R404a, R125, etc.
Constant Power Indication
Ultimate Sensitivity, Less than 0.1 ounces per year (3 gr/yr)
Response time : instantaneus
Warming up time : < 110 Sec, in 25ºC, 60% rH
Continuous operation time : 4 hour
Power Supply : 1.5V “C” Batteries ×2
Dimensions : 210(L) × 80(W) × 50(D)mm
Weight : 560g approx.
Leak Detector for Combustible Gas
Leak Detector for Combustible Gas
Alat Deteksi Kebocoran Gas Yang Mudah
terbakar seperti LPG, LNG, Butane, dll
Warm against dangerous explosive gas
Checks for explosive gas in places where electrical measurement has to be taken
Applications include: manholes, gas lines, fuel systems, exhausts, propane stations, IAQ test and arson residue.
Used in almost any situation where combustible gasses, vapor or residues need to be found.
Instantaneous response
Automatic warm up
Ultimate sensitivity 5-500ppm
Adjustable sensitivity
Adjustable “Geiger counter” Type signal
Partial List of Detectable Compounds
Minimum Detectable Concentration
Acetylene 50 ppm
Methyl Chloride 5ppm
Iso-Butane (R600a) 500 ppm
Hydrogen Sulfide 5ppm
Methane 500 ppm
Acetone 50 ppm
Ethane (R170) 500 ppm
Methanol 50 ppm
Propane (R290) 500 ppm
Ammonia (R717) 20 ppm
Ethylene 500 ppm
Gasoline 1ppm
Digital Single Gas Detector
Digital Single Gas Detector
Alat deteksi dan ukur konsentrasi gas H2S, CO,
O2 dan LEL/Combustible.
Digital Reading Singel Gas Detector – Gas Alert Extreme : H2S, CO, O2, SO2, PH3, Cl2, NH3, NO2, HCN, ETO, CLO2, O3, or NO
Detect 1 gas only :
Specifications :
– H2S Hydrogen Sulfide : 0-100 ppm
– CO Carbon Monoxide : 0-1000 ppm
– CO Carbon Monoxide, H2 Resistant : 0-1000 ppm
– O2 Oxygen : 0-30.0%
– SO2 Sulfhur Dioxide : 0-100 ppm
– Cl2 Chlorine : 0~50.0 ppm
– HCN Hydrogen Cyanide : 0~30.0 ppm
– NO2 Nitrogen Oxide 0~99.9 ppm
– NH3 Ammonia : 0~100 ppm
– PH3 Phosphine : 0~5.0 ppm
– 03 Ozone : 0~1 ppm
– ETO Ethylene Oxide 0~100 ppm
– NO Nitric Oxide : 0~250 ppm
– CLO2 Chlorine Dioxide : 0~1 ppm
Digital reading gas detector (4 gas)
Digital reading gas detector (4 gas)
Alat deteksi dan ukur konsentrasi gas H2S, CO,
O2 dan LEL/Combustible.
Gas Detector for 4 Gases :
– H2S – hydrogen sulfide : 0-100 ppm (1ppm)
– O2 – oxygen : 0-30.0% (0.1%)
– CO – carbon monoxide : 0-500 ppm (1ppm)
– LEL combustibles : 0-100%LEL (1%)
Four alarm levels :
– Instant Low and High Alarm for all gases
– TWA (time weighted average) for H2S, CO;
– STEL (short term exposure limit) for H2S, CO; OL
– CO; OL (over limit alarm)
Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions
– Size : 10.7x6x3.6 cm, Weight : ± 160 gram
– Temperature operation : -20 to 58ºC
– Humidity : 0% to 95% RH (Non Condensing)
– Simple one-button operation
– Durable, stainless steel alligator clip
Integral concussion-proof boot for the most rugged environments
Continuous LCD shows simultaneous gas concentrations
Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
Provides 95 dB alarm tone and bright wide-angled alarm bars
Equipped with internal vibrating alarm for high noise areas
Backlight: in alarm (auto) and on demand reactivation
Simple automatic calibration procedure
Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
Carbon Monoxide (CO) Meter
Carbon Monoxide (CO) Meter
Alat deteksi dan ukur konsentrasi gas Karbon Monoksida (CO) di udara
“GENERAL FEATURES &SPECIFICATIONS
Operation Temperature: 0℃~ 50℃
Storing Temperature: -30℃ ~ 60℃
Operating Humidity: 0-99% Relative humidity(Non-condensing)
Measurement Range: 0-1000PPM
Measurement Resolution: 1PPM
Accuracy: 5% or ±10PPM
Warm Up Period: Less than 2 seconds ”
“PACKING INFORMATION
Power: 9V Battery(6F22)
Product Net Weight: 162g
Product Size: 158.5×59.2x41mm”
CO2 Gas Detector
CO2 Gas Detector
Alat deteksi dan ukur konsentrasi gas Karbon Monoksida (CO) di udara
Specifications:
– Measures: Carbon dioxide in PPM, temperature (F or C)
– Sensing method: NDIR (Non-Dispersive Infrared) technology
– Calibration: Self-calibrating mode
– Measurement range: 0~2,000ppm
– Display: LCD
– Battery Life: approx. 24 hours continuous reading
– Alarm: Yes (80dB)
– Precision: ± 50ppm, ± 5% of reading
Includes:
– 4 AA Batteries
– ABS plastic case
– Manual
Warranty:
– 1 year
Data Logger Kit:
– 120/220VAC adapter (power for long-term operation)
– DB9 Serial Cable, USB adapter
– Software CD
– Requires PC running Win2K/XP/Vista with DB9 Serial or USB port
– Must be plugged into PC to log data
Carbon Dioxide Gas Detector w/Case
Carbon Dioxide Gas Detector w/Data Logger Kit
EMISSION ANALYZER
EMISSION ANALYZER
Alat ukur dan analisa emisi gas buang pada
kendaraan bermotor bensin
Product Characteristics
1. 5Gas (NOX added) Analyzer
2. Durable Performance that has passed a severe
cold test at -10ºC
3. Automatic Temperature Adjustment (2~8 min)
4. Pause Option Available
5. 6 LED Display Windows
(CO, HC, CO2, O2, λ, AFR/ NOX), and a Built-In Printer
6. Name and Phone Number Memory Option
7. Time and Date Display Option when using printer
8. RS232 PC Program (optional)
9. Suitable for professional engine tune-ups
Product Specifications
Target Subject: CO, HC, CO2, O2, λ (Excess Air Ratio), AFR, NOx
Sensor Theory: CO, HC, CO2: Non-Dispersive Infrared Analysis (NDIR)
O2, NOx: Electrochemical Cell
Analysis Range CO: 0.00 ~ 9.99%
HC: 0 ~ 9999 ppm
CO2: 0.0 ~ 20.0%
O2: 0.00 ~ 25.00 %
λ: 0 ~ 2.000
NOX: 0 ~ 5,000ppm
Repetition Rate: Lower than ±2% FS
Response Time: Within 10 seconds (90% of the time)
Preheat Time: Approx. 2~8 minutes
Sample Requirement: 4 ~ 6 L/min
Voltage Use: AC110V or AC220V ±10%, 50/60Hz
Power Consumption: Approx. 50W
Category Temperature: 0ºC ~ 40ºC
Size: 285 x 410 x 155mm
Weight: Approx. 4.5kg
Included Accessories: Probe, Probe Hose, Emergency Fuse, Water Leak Testing Cap, Emergency Filter, Instruction Manual, Power Cord, Ground Wire, and Type Approval Certificate
Optional Accessories: Printer, Printer Paper, RS232
DIESEL SMOKE TESTER
DIESEL SMOKE TESTER
Alat ukur dan analisa emisi gas buang pada
kendaraan bermotor diesel
Measuring principle: Reflection Photemetry
Smoke Sampling: Air Cylinder
Sampling volume: 330 + / – 15cc
Display: Digital Display
Testing Method: Standard Contamination paper
Measurement Range: 0.0 ~ 100%
Min Indication: 0.1% (1/10000)
Degree of indication: Max 2%
Power supply: AC 220 V, 50 / 60 Hz
Weight: Net – 15 Kg, Gross – 18 Kg
Dimension: 330 x 360 x 370 (mm)
Combustion Efficiency & Emission Analyzer
Combustion Efficiency & Emission Analyzer
Alat ukur dan analisa emisi gas buang pada
kendaraan bermotor diesel
Specifications:
Measured Data
Oxygen: 0.1 to 20.9%
Carbon Monoxide (hydrogen compensated): 0 to 4,000 ppm
Carbon Monoxide High: 4,001 to 80,000 ppm
Nitric Oxide*: 0 to 3,500 ppm
Nitrogen Dioxide*: 0 to 500 ppm
Sulfur Dioxide*: 0 to 4,000 ppm
Combustibles: 0 to 5% (application dependent)
Stack Temp.: -4 to 2400°F (-20 to 1315°C)
Primary/Ambient Temp.: -4 to 999°F (-20 to 999°C)
Pressure/Draft: -27.7 to 27.7 inches of Water
Calculated Data
Combustion Efficiency: 0.1 to 100.0%
Excess Air: 1.0 to 250%
Carbon Dioxide(dry basis): 0 to fuel dependent maximum
NOx: 0 to 4,000 ppm
NOx (ref. to %O2): 0 to 17,000 ppm
CO (ref. to %O2): 0 to 99,9999 ppm
NO (ref. to %O2): 0 to 14,900 ppm
NO2 (ref. to %O2): 0 to 2100 ppm
SO2 (ref. to %O2): 0 to 17,000 ppm
Miscellaneous
Power: Universal AC adapter and an internal battery pack. Adapter will accept input voltages from 100 to 240V. Fully charged battery pack provides a minimum of 8 hours of operation
Pumps & Probe: Two pumps are included. The first pump supplies gas sample to the sensors. The second pump supplies fresh air to purge the low-range CO sensor when CO levels exceed 400 ppm. Probe includes a standard probe and hose assembly equipped with a water trap, particulate filter, probe stop, 15 feet of hose, and 12-inch probe tube
Size: 13.5″H x 18.5″W x 9″D (342.9 x 467.0 x 228.6 mm)
Weight: 25 lbs (11.34 kg)
Warranty: 1 year
* Optional
Gas Analyzer
Gas Analyzer
Alat Analisa Gas
Gas Analyzer including:
O2 Sensor 0 to 25 %
CO Sensor 0 to 8000 ppm*
*With Auto-Range up to 50,000 ppm
NO/NOx Sensor 0 to 4000 ppm
SO2 Sensor 0 to 4000 ppm
CO2 Calculated 0 to 99.9 %
Flue Gas & Air Temperature Measurement
Draft & Differential Pressure Measurement
Efficiency, Losses, & Excess Air Calculations
300mm Probe, 800oC max, with 3m Dual Hose
External Water Trap with Filter Cartridge
Rechargeable Li Ion Batteries & AC Charger
Internal Memory, 900 Tests
Internal Impact Printer (Non-Thermal)
Rubber Holster with Magnetic Support
PC Software Package with USB Cable
ABS Hard Plastic Carrying Case
Operating Instructions & Calibration Cert.
Recommended Spare Consumable Parts:
Filter Cartridge
Printer Paper Roll
Printer Ribbon
Optional Accessories:
3m Dual Hose Extension
Differential Pressure Hose Kit
Portable Industrial Flue Gas & Emissions Analyzer
Alat Analisa Gas industri
E8500 Gas Analyzer Including:
O2 Sensor 0 to 25 %
CO Sensor 0 to 8000 ppm*
*With Auto-Range to 20,000 ppm
NO/NOx Sensor 0 to 4000 ppm
CO2 Calculated 0 to 99.9 %
• Wireless Remote Printer
• 300mm Gas & Draft Probe, 800oC max, with 3m Dual Hose
• Flue Gas & Air Temperature Measurement
• Draft & Differential Pressure Measurement
• Internal Memory (1000 Tests)
• Rechargeable Battery Pack with 110-240VAC, 50-60 Hz, Battery Charger
• Efficiency, Losses, & Excess Air Calculations
• Built-in Thermoelectric Chiller with Automatic Condensate Removal
• PC Software Package with Real-Time Graphing, Logging, and Recording
• Wireless Communications with PC and other Windows compatible devices
• Protective Carrying Case
• Calibration Report & Instruction Manual
**Can add up to six more sensors (See below for details)
Optional Additional Sensors:
NO2 Sensor 0 to 1000 ppm
SO2 Sensor 0 to 4000 ppm
H2S Sensor 0 to 500 ppm
CO2 Sensor (NDIR) 0 to 20 %
and CxHy Sensor (NDIR) 0 to 5 %
and CO Sensor (NDIR) 0 to 15 %
Recommended Spare Consumable Parts:
Line Filter
Condensation Filter
Paper Roll
Optional Accessories:
900mm Pitot Tube (for Gas Velocity)
3m Dual Hose Extension
Residential Gas Detector
Residential Gas Detector
Alat deteksi gas LPG, LNG utk perumahan, apartemen
Specification:
Detection Method: Diffusion & Catalytic Combustion
Power: AC 220V/60 Hz
Appropriate Gas: LPG, LNG
Power Consumption: 3W
Alarm Concentration: LPG= 0.06 – 0.45% (600ppm – 4500ppm)
Reset Method: Automated reset
Output: DC 12V with alarm
Temperature: -20 to +40 deg.C
Humidity: 95% RH not exceeding
Dimension: W320 x H420 x D170
LNG & LPG Gas Leak Detector
LNG & LPG Gas Leak Detector
Detector + Controler + Shut Off Valve
ND 104 Detektor Gas LPG atau LNG
ND 104 bisa dipasang 1 sampai 3 buah
GSV-102 Mekanikal controller berbunyi pada saat menerima signal dari ND 104
Pada saat yang bersamaan mengirim signal ke shut-off valves
SV 20A shut off valve yang berfungsi menutup ball valve pada saat kebocoran gas terdeteksi
Shut of valve bisa mechanical maupun selonoid valve 220V NO maupun NC
LNG & LPG Gas Leak Detector
LNG & LPG Gas Leak Detector
Detector + Monitor + Controler Shut Off Valve
ND 104 Detektor Gas LPG atau LNG
GSV-103 M Mekanikal controller type zona berbunyi pada saat menerima signal dari ND 104
Pada saat yang bersamaan mengirim signal ke shut-off valves
GSV-103 M akan memberitahukan kita detector 1, 2, 3 yang berbunyi
SV-20A shut off valve yang berfungsi menutup ball valve pada saat kebocoran gas terdeteksi
4″ (101mm) Temperature Chart Recorder
Alat monitor dan recorder suhu/temperature
Alat monitor dan recorder suhu/temperature
Specifications
Ambient Operating RH Conditions : 0-95% RH non-condensing
Ambient Operating Temperature Conditions: -22 to 122F (-30 to 50C)
Approvals: CE
Battery Life (Avg): 3 Years
Calibration Options: N100, N300, N400
Channels: CH1: Temperature
Chart Rotation Speed: 24 Hour or 7 Day
Dimensions: 2.4 x 5.2 x 5.2in
Display Accuracy: 3.6
Display Dimensions Height: 0.36
Display Dimensions Width: 1.8
Display Resolution: 0.1
Display Type: LCD
Enclosure: Black ABS and Polycarbonate
IP Rating: 21
Included Accessories: One AA Battery, Red Pen and Quick Start Guide. *Charts sold separately.
Mounting Options: Free Standing or Wall Mounted
Power Source: Battery; One AA Battery (User Replaceable)
Response Time: 11 Minutes to 63% of Full Scale (in air moving 5′ per second)
Temperature Accuracy: +/-2% from -22 to 122F
Temperature Accuracy (Recorder Only): ± 2% Of Full Scale
Temperature Range: -22 to 122F (-30 to 50C)
Temperature Sensor: Precise spiral wound bi-metallic strip transducer
Unit Weight: 3 lbs
Temperature Data Logger with Large Display
Temperature Data Logger with Large Display
Alat ukur temperature Digital
Specifications
Alarm Type: Audio/Visual on High/Low Temp Limits
Ambient Operating RH Conditions : 0-95% RH non-condensing (Logger only)
Ambient Operating Temperature Conditions: -4 to 158F (-20 to 70C)
Approvals: CE
Battery Backup: Yes, with use of AC Adapter
Battery Life (Avg): 6 Months
Cable Details: USB – Male Series A plug to 5 pin Male Series B mini plug. Serial – 9 pin female D-shell to male 2.5mm
stereo plug
Cable Length: 6ft
Calibration Options: N100, N300, N400, N520
Channels: CH1: Temperature, CH2: Temperature
Data Capacity: 32,000
Dimensions: 1.6 x 3 x 4in
Display Dimensions Height: 1.375
Display Dimensions Width: 2.0
Display Resolution: 0.1 from 0.0 to 999.99; 1 over 1000
Display Type: LCD
Display Update Rate: 10 Seconds (Battery Power), 1 Second (AC Power)
Download Time: 1 Minute (USB), 3 Minutes (Serial)
Download Type: USB / Serial / Flash Card
IP Rating: 20
Included Accessories: Four AA Batteries, Quick Start Guide and 4′ Bead-Wire Probe. *Software is not included.
Memory Type: EEPROM, Removable Flash Storage Device
Minimum Software Version Required: 8.3
Mounting Options: Wall Mount (With Keyhole)
Network Connectivity: MP100
PC Requirements: Microsoft Windows 98 or newer, 16 MB RAM, 1 free COM (serial) port with dedicated interrupt or 1
USB root hub, CD drive, VGA monitor or better
Power Source: Four AA Batteries (User Replaceable) *AC Adapter is not included, but can be used.
Power Source Notes: AC Power is optional, but not included.
Power Status Indicator: LCD Display
Remote Sensor Length: 4
Remote Sensor Type: 1 K T/C with Mini Connector
Response Time: 30 Seconds to 63% of Full Scale
Sample Interval: User Selectable (from 1 second to 24 hour intervals, in 1 or 10 second increments).
Software Options: A015, A016, A025, A026
Temperature Accuracy: +/-1.8F from -22 to 122F [External Sensor] 3.8F Remaining (+/-1C from -30 to 50C [External
Sensor] 2.1C Remaining)
Temperature Range: -300 to 2000F (-184 to 1093C)
Temperature Sensor Type: Thermistor/ThermocoupleUnit Weight: 3 lbs
2-Probe Vaccine Monitoring Temperature Data Logger
2-Probe Vaccine Monitoring Temperature Data Logger
Specifications
Alarm Type: Audio/Visual on High/Low Temp Limits
Ambient Operating RH Conditions : 0-95% RH non-condensing (Logger only)
Ambient Operating Temperature Conditions: -4 to 158F (-20 to 70C)
Approvals: CE
Battery Backup: 4 AA Batteries
Battery Life (Avg): 6 Months
Cable Details: USB – Male Series A plug to 5 pin Male Series B mini plug. Serial – 9 pin female D-shell to male 2.5mm
stereo plug
Cable Length: 6ft
Calibration Options: N100, N300, N400, N520
Channels: CH1: Temperature, CH2: Temperature
Data Capacity: 32,000 (16,000 per Channel)
Dimensions: 1.6 x 3 x 4in
Display Dimensions Height: 1.375
Display Dimensions Width: 2.0
Display Resolution: 0.1 from 0.0 to 999.99; 1 over 1000
Display Type: LCD
Display Update Rate: 10 Seconds (Battery Power), 1 Minute (AC Power)
Download Time: 1 Minute (USB), 3 Minutes (Serial)
Download Type: USB / Serial / Flash Card
IP Rating: 20
Included Accessories: Four AA Batteries, Quick Start Guide, Two 4′ Bead-Wire Probes and Two Glycol Bottles.
*Software is not included.
Memory Type: EEPROM, Removable Flash Storage Device
Minimum Software Version Required: 8.0
Mounting Options: Wall Mount (With Keyhole)
Network Connectivity: MP100
PC Requirements: Microsoft Windows 98 or newer, 16 MB RAM, 1 free COM (serial) port with dedicated interrupt or 1
USB root hub, CD drive, VGA monitor or better
Power Source: 4 AA Batteries
Power Source Notes: AC Power is optional, and sold separately
Power Status Indicator: LCD Display
Remote Probe Accuracy: 0.3% of Full Scale
Remote Sensor Length: 4′
Remote Sensor Type: 2 K T/C with Mini Connectors
Response Time: 30 Seconds to 63% of Full Scale
Sample Interval: User Selectable (from 5 minutes to 20 minutes, in 1 minute increments).
Software Options: A015, A016, A025, A026
Temperature Accuracy: +/-1.8F from -22 to 122F 3.8F Remaining (+/-1C from -30 to 50C 2.1C Remaining)
Temperature Range: -20 to 158F (-29 to 70C)Temperature Sensor Type: Thermistor/Thermocouples
Unit Weight: 3 lbs
Ethernet Vaccine Temperature Data Logger
Ethernet Vaccine Temperature Data Logger
Specifications
Alarm Type: Phone Call, SMS Text, Email, Audible
Ambient Operating RH Conditions : 0-95% RH non-condensing
Ambient Operating Temperature Conditions: -22 to 122F (-30 to 50C)
Approvals: RoHS, CE
Battery Backup: 4 AA Batteries
Battery Life (Avg): 72 hours
Cable Details: CAT5e Ethernet
Cable Length: 6ft
Calibration Options: N100 , N300, N400, & N520
Channels: CH1: Temperature
Data Capacity: 32,000 (Backup)
Digital Display: Yes
Dimensions: 1.7 x 4.25 x 4.25in
Download Type: Ethernet (Automatic)
Enclosure: Black; ABS Plastic Clam Shell
IP Rating: 21
Included Accessories: Ethernet, AC Adapter, 1-Probe with Glycol Bottle, 4 AA Batteries
Mounting Options: Free Standing or Wall Mount (With Keyhole)
Note on Alarm Type: Alarms can be created for scenarios where the readings are outside a given range, communication
has been lost, or the batteries are low. All paid accounts are eligible to receive email and SMS text alarm notifications.
PC Requirements: DicksonOne.com can be accessed from any Windows, Mac, or Linux PC/Laptop using Google
Chrome, FireFox, Safari, or Internet Explorer 9. WiFi loggers need a Windows PC with .Net 4.0 or newer for initial
configuration. WiFi loggers are compatible with WEP, WPA, and WPA2 Personal security protocols.
Power Cord: 6 ft
Power Source: 120 to 240 VAC, 12 VDC (INTL fittings available)
Power Source Input: AC 100-240 0.5V 60/50 Hz
Power Source Output: DC 9V, 1A
Power Status Indicator: Red/Green/Blue (RGB) LED
Remote Sensor Length: 6 ft
Response Time: 30 Seconds to 63% of Full Scale
Sample Interval: User Selectable from: 60 seconds, 90 seconds, 2 minutes, 5 minutes, 10 minutes, 30 minutes, 1 hour
Storage Conditions: -22 to 122F (-30 to 50C)
Storage Conditions RH: 0-95% RH non-condensing
Temperature Accuracy: +/-0.9F from -58 to 68F (+/-0.5C from -50 to 20C); +/-1.2F from 69 to 122F (+/-0.7C from 21 to
50C)
Temperature Accuracy (Remainder of Range): +/-2F (+/-1C)
Temperature Range: -55 to 122F (-48 to 50C)
Temperature Sensor Type: Field Replaceable with Thermistor hard wired to PBC, submersible tip sealed in leak-proof
glycol bottle Glycol will freeze at -55F
Unit Weight: 3 lbs
WiFi Vaccine Temperature Data Logger
WiFi Vaccine Temperature Data Logger
Specifications
Alarm Type: Phone Call, SMS Text, Email, Audible
Ambient Operating RH Conditions : 0-95% RH non-condensing (Logger only)
Ambient Operating Temperature Conditions: -22 to 122F (-30 to 50C)
Antenna Type: External
Approvals: RoHS, FCC Part 15 Compliance, CE
Battery Backup: 4 AA Batteries
Battery Life (Avg): 72 hours
Calibration Options: N100 , N300, N400, & N520
Channels: CH1: Temperature, CH2: Temperature
Data Capacity: 32,000 (16,000 per channel); Backup
Digital Display: Yes
Dimensions: 1.7 x 4.25 x 4.25in
Download Type: Wireless
Enclosure: Black; ABS Plastic Clam Shell
IP Rating: 21
Included Accessories: USB Cable, AC Adapter, 2-Probe with Glycol Bottle, 4 AA Batteries
Mounting Options: Free Standing or Wall Mount (With Keyhole)
Note on Alarm Type: Alarms can be created for scenarios where the readings are outside a given range, communication
has been lost, or the batteries are low. All paid accounts are eligible to receive email and SMS text alarm notifications.
PC Requirements: Minimum of 2 GB RAM; Windows XP (with service pack 3) and Windows 7; 2 available USB ports
Power Cord: 6 ft
Power Source: 120 to 240 VAC, 12 VDC (INTL fittings available)
Power Source Input: AC 100-240 0.5V 60/50 Hz
Power Source Output: DC 9V, 1A
Power Status Indicator: Red/Green/Blue (RGB) LED
Radio Frequency: 2.4 GHZ
Remote Sensor Length: 6 ft
Response Time: 30 Seconds to 63% of Full Scale
Sample Interval: User Selectable from: 60 seconds, 90 seconds, 2 minutes, 5 minutes, 10 minutes, 30 minutes, 1 hour
Storage Conditions: -22 to 158F (-30 to 70C)
Storage Conditions RH: 0-95% RH non-condensing
Temperature Accuracy: +/-0.9F from -58 to 68F (+/-0.5C from -50 to 20C); +/-1.2F from 69 to 122F (+/-0.7F from 21 to
50C)
Temperature Accuracy (Remainder of Range): +/-2F (+/-1C)
Temperature Range: -58 to 158F (-50 to 70C)
Temperature Sensor Type: Field Replaceable Thermistor hard wired to PBC, submersible tip sealed in leak-proof glycol
bottle Glycol will freeze at -55F
Unit Weight: 3 lbs
Units/Pkg: 1
Wireless Range: 300 ft line of sight
Vaccine Alarm Thermometer
Vaccine Alarm Thermometer
Specifications
Alarm Type: Audible/Visual Alarm
Ambient Operating RH Conditions : 0 to 95% RH (non-condensing)
Ambient Operating Temperature Conditions: 32 to 122F (0 to 50C)
Approvals: CE, ROHS
Battery Life (Avg): 1-Year (at 5-minute sample rate and no alarm conditions) – At Ambient Conditions
Digital Display: Yes
Dimensions: 4.6 x 2.75 x 0.8cm
Display Dimensions Height: 1″
Display Dimensions Width: 1.9″
Display Resolution: 0.1°F (0.1°C)
Included Accessories: 2 AA Batteries and Manual, Velcro for mounting, Certificate of Calibration; MM125: 2 Probe in
Glycol Bottles
Mounting Options: Wall mount with keyhole or Velcro
Remote Sensor Length: 10 ft.
Response Time: 30 seconds to 63% FS
Sample Interval: Standard = 5 Min; Fast = 1 Min
Sample Storage Rate: Recording Times: Continuous – Updates Min / Max stores only most current reading
Temperature Accuracy: +/-1.8F from 0 to 120F 0F (+/-1C from -18 to 49C)
Temperature Range: -58 to 122F (-50 to 50C)
Temperature Sensor: Thermistors hard wired to PCB, submersible tips sealed in leak-proof glycol bottles
Unit Weight: 3.2 oz (unit only); 4.2 oz (unit, probes, and glycol bottles)
Paperless Temperature Recorder with Probe
Paperless Temperature Recorder with Probe
Specifications
Ambient Operating RH Conditions : 0 to 95% RH non-condensing (Logger Only)
Ambient Operating Temperature Conditions: 0 to 122F (-18 to 50C)
Battery Backup: 12 Hrs (Re-chargeable batteries included; Hardwired)
Cable Details: USB – Male Series A plug to 5 pin Male Series B mini plug.
Calibration Options: N100 , N300, N400, & N520
Channels: CH1: Temperature; CH1: Temperature (F/C)
Data Capacity: 32,000
Dimensions: 1.4 x 8.5 x 6.9in (3.5 x 21.6 x 17.5cm)
Display Dimensions Height: 5
Display Dimensions Width: 6.4
Display Type: Touchscreen
Display Update Rate: Varies with logging interval
Displays Min/Max: Yes
Download Type: USB / Flash Card
Flash Card Option: SD Card (2GB or less)
IP Rating: 21
Key Features: Touchscreen, multiple screen views, on-screen zoom and scroll, software optional, user customizable
sample rate, temperature scales and unit of measure
Minimum Software Version Required: 17.2.0
Mounting Options: Mounting Bracket (Included)
Power Cord: 6 ft
Power Source: 120 to 240 VAC, 12 VDC (INTL adapters available)
Remote Sensor Length: 4; 4
Remote Sensor Type: Field Replaceable with 1 K T/C with Mini Connector
Required Software: A016, A026, N525 (all optional)
Response Time: 1 Minute to 63% of Full Scale
Sample Interval: User Selectable
Temperature Accuracy: +/-1.8F from 0 to 122F (+/-1C from -17 to 50C)
Temperature Range: -300 to 2000F (-184 to 1093C)
Unit Weight: 1.15 lbs
Compact Temperature & Humidity Logger
Compact Temperature & Humidity Logger
Specifications
Ambient Operating RH Conditions : 0-95% RH non-condensing
Ambient Operating Temperature Conditions: -4 to 158F (-20 to 70C)
Approvals: CE
Battery Life (Avg): 6 Months (at 2 Minute Sample Rate, Ambient Temperature)
Cable Details: USB – Male Series A plug to 5 pin Male Series B mini plug.
Cable Length: 6ft
Calibration Options: N100, N300, N400, N520
Channels: CH1: Temperature, CH2: Humidity
Data Capacity: 7,936 (3,968 per Channel)
Dimensions: 0.62 x 1.4 x 1.75in
Download Time: 30 Seconds
Download Type: USB
Enclosure: Polycarbonate
Humidity Accuracy: +/-3% RH from 60 to 95%; +/-2% RH from 0 to 60%
Humidity Range: 0-95% RH non-condensing
Humidity Sensor Type: Digital RH Sensor
IP Rating: 20
Included Accessories: 3V Lithium Battery (One per Unit) and Quick Start Guide. *Software is not included.
Memory Type: EEPROM
Minimum Software Version Required: 15.5
Notes: The TK550 is a twelve pack of TK150s. TK150s may NOT be purchased individually.
PC Requirements: Microsoft Windows 98 or newer; 16 MB RAM, 1 free USB root hub, CD drive, VGA monitor or better
Power Source: 3V Lithium Battery (User Replaceable)
Response Time: 10 Minutes to 63% of Full Scale
Sample Interval: User Selectable (from 10 seconds to 24 hour intervals, in 10 second increments).
Software Options: A016, A026
Temperature Accuracy: +/-1.8F from -4 to 158F (+/-1C from -20 to 70C)
Temperature Range: -4 to 158F (-20 to 70C)
Temperature Sensor Type: Digital Sensor
Unit Weight: 1 lb
Units/Pkg: 12
Software
Software
Software dan kabel data USB untuk download data dari
logger
This is the latest version of DicksonWare™ Software (USB download cable included). Use the software to setup your Dickson loggers, and view and download data.
Key features include:
Easy installation
Easy logger setup and data downloads
Data visualization with tables and graphs
Real-time monitoring
Specification
Cable Details USB – Male Series A plug to 5 pin Male Series B mini plug.
Cable Length 6ft
Computer Interface USB
PC Requirements: Microsoft Windows 98 or newer, 4 MB RAM, 1 free USB port, CD drive
Unit Weight 1 lb
Small Pressure Data Logger
Small Pressure Data Logger
Specifications
Ambient Operating RH Conditions : 0 to 100% RH
Ambient Operating Temperature Conditions: 22 to 122F (0 to 50C)
Approvals: CE
Battery Life (Avg): 1 Year at 5 minute sample rate (also dependent on operating environment)
Calibration Options: N100, N300
Data Capacity: 7936
Dimensions: 2 x 2 x 2inches (58 x 58 x 58cm)
Download Time: 45 Seconds
Download Type: USB
Enclosure: Water Resistant Stainless Steel
Fitting: 1/4″ NPT Thread, 5/8″ Hex (Sensor includes built-in Diaphragm Seal)
IP Rating: 65
Included Accessories: One 3.6 V Lithium Battery and Quick Start Guide. *Software sold separately.
Minimum Software Version Required: 17.16
PC Requirements: Microsoft Windows 98 or newer, 4 MB RAM, 1 free COM (serial) port, CD drive
Power Source: 3.6 V Lithium Battery (User Replaceable); Battery
Power Status Indicator: LED Indicator
Pressure Accuracy: 1%
Pressure Range: 0 to 100PSI
Sample Interval: User Selectable (from 10 seconds to 24 hour intervals, in 10 second increments).
Unit Weight: 1 lb
Units of Measure: PSI, ATM, Bar, mBar, InH2O, FtH2O, mmH2O, mmHG, InHg, Pascal, kP, MCA
Units/Pkg: 1
8″ (203mm) Pressure Chart Recorder, 0-200 PSI, 7-Day
8 in (203mm) Pressure Chart Recorder, 0-200 PSI, 7-Day
Specifications
Ambient Operating RH Conditions : 0-95% RH non-condensing
Ambient Operating Temperature Conditions: -22 to 122F (-30 to 50C)
Battery Life (Avg): 1 Year
Calibration Options: N100, N300
Channels: CH1: Pressure
Chart Rotation Speed: 7 Day
Dimensions: 3.6 x 10.3 x 9.5in
Enclosure: Plastic NEMA 4X Case with Window in Door
Fitting: 1/4″ NPT Thread, 5/8″ Hex
IP Rating: 66
Included Accessories: One AA Battery, Red Pen and Quick Start Guide. *Charts sold separately.
Mounting Options: Stem or Wall Mount (With Keyhole)
Power Source: Battery; One AA Battery (User Replaceable)
Pressure Accuracy: 2% of Full Scale
Pressure Range: 0 to 200PSI
Response Time: 1 to 5 Seconds
Unit Weight: 9 lbs
Wire Rope Tester
Wire Rope Tester
Alat uji kerusakan pada sling
– Mendeteksi Local Fault (LF) Tester
Mendeteksi defect pada sling pada set level
– Testing Range Wire : Dia 10 sampai 25mm
– Kecepatan Testing : 0.1 sampai 2.5 meter / detik
Alat Termasuk :
– Main Unit / Measuring Head
– 2 Nicad Rechargeable Battery
– Battery Charger
– Carrying Case
– Buku Panduan
MD20, 8- 22mm
MD25, 10 – 25mm
MD-NV Digital Data Logger
MD-NV Digital Data Logger
Untuk mentransfer deteksi alat ke komputer
MD-NV is a PC recording for MD-20 and MD-25 wire rope tester, used to record signal runs onto computer hard-drive and to visualize signal traces on computer display. The set consists of Digital Adapter and Data Logger Software to record signal into PC hard-drive. The data can be analyzed further in the PC using MD-120-PRE software.
Notes: Laptop is not included.
VISCOMETER CUP (Japan)
VISCOMETER CUP (Japan)
Alat ukur kekentalan cat
Specifications
JIS Standard Design at the construction site
Rapid measurement of painting paint viscosity convenient to use
The Iwata cup is based on the Japan method of liquid viscosity measurement. It has a taper orifice with the internal diameter of 50mm to the external diameter 86mm. However, the procedure of usage is the same as that of the Zahn Cups.
Main Technical Parameters:
1. Internal Vertical Height: 43±0.1mm
2. Internal Orifice: 3.81±0.5mm
3. External Orifice: 6.0±0.5mm
4. Internal Diameter: 50±0.5mm
5. Outer Diameter: 86±0.1mm
6. Operating Temperature: 10±0.1mm
7. Centistokes Range: 70 to 370
8. Efflux Time: ±0.2s
Operation:
1. Immerge the viscosity cup into the fluid, and make sure the cups upper edge lower the level surface of the fluid;
2. Take the cup upright out of the fluid, and press the stopwatch at the same time;
3. Press the stopwatch again when the flowing stream appear the first breaking-off;
4. Repeat the above-mentioned procedure twice for precise evaluation;
5. Average the total three testing values as the flow speed or viscosity of the fluid.
Munsell Book of Color
Munsell Book of Color
Buku Bagan warna
The Matte book of color includes a complete range of colors creating a physical model of the Munsell Color Space. The book includes a brief tutorial on how the Munsell Color System works, with easy to follow graphics for understanding where the Munsell color space the color is located.
The Matte Collection contains over 1,600 removable high-gloss color samples on 40 constant-hue pages.
Binder Specifications: Single 3.5″
ring binder: 13.75″ (L) x 4″ (W) x 11.75″ (T)
Surface Profile Gauge
Surface Profile Gauge
Alat pembanding profil permukaan
Elcometer 127 Sand Surface Comparator
Section Profiles: 0.5, 1, 2, 3, 4 mils
Elcometer 127 Grit Surface Comparator
Section Profiles: 1.5, 2, 3, 4.5, 5.5 mils
Elcometer 127 Shot Surface Comparator
Section Profiles: 2, 2.5, 3, 4, 5.5 mils
Illuminated magnifier: (x 5) with integrated surface comparator holder
PosiTest® Pull-Off Adhesion Tester ( Alat ukur daya lekat cat pada obyek )
Alat ukur daya lekat cat pada obyek
Alat ukur daya lekat cat pada obyek
Overview: Measures adhesion of coatings to metal, wood, concrete and other rigid substrates Revolutionary self-alignment feature and pull rate indicator. Conforms to national and international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others
PosiTest®AT-M Manual Adhesion Tester
PosiTest®AT-M Manual Adhesion Tester
■ Heavy-duty manual hydraulic pump designed to apply smooth and
continuous pressure with a single stroke
■ Pull Rate Indicator to manually monitor and adjust the rate of pull
PosiTest®AT-A Automatic Adhesion Tester
PosiTest®AT-A Automatic Adhesion Tester
“■ Electronically controlled hydraulic pump automatically applies smooth and
continuous pull-off pressure at a user-specified rate”
“■ Test with the simple push of a button. No twisting, pumping or cranking.
No valves to close, needles to reset, or scales to adjust”
“■ User selectable pull rates ensure compliance with international test methods for
a variety of industries including metal, wood and concrete

“■ Built-in rechargeable batteries perform over 200 tests per charge.
Continue testing with AC power while batteries recharge.
Supplied with universal AC Adapter”
Specifications
Dolly Size*: 20 mm
Resolution: 1 psi (0.01 MPa)
Accuracy: ± 1% Full Scale
Adhesion Strength** : : 0 – 3000 psi (0 – 20 MPa)
*Additional dolly sizes available to meet specific measuring needs – contact supplier for details
**Varies with dolly size
Both Models include: Adhesion tester with digital display, built-in rechargeable NiMH batteries with charger, 20 mm aluminum test dollies (20), abrasive pad, cutting tool, adhesive with mixing sticks and palettes, cotton swabs, instruction booklet and video, Certificate of Calibration traceable to NIST, and sturdy, lightweight carrying case
Hexagonal Wet Film Combs
Hexagonal Wet Film Combs
Alat ukur ketebalan cat basah
Range: 25 – 3000µm
values: 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800, 3000µm
Dimension: 75 x 65 x 1mm
Weight: 20g
Can be used in accordance with:
ASTM D 4414-A, AS/NZS 1580.107.3, BS 3900-C5-7B, ISO 2808-1A, ISO 2808-7B, NF T30-125, US NAVY PPI 63101-000,
US NAVY NSI 009-32
Wet Film Combs CM8000
Wet Film Combs CM8000
Alat ukur ketebalan cat basah
Measuring Range: 25-3000 Microns (5-118mil/Thou)
Step Graduation : 25um
Measuring Procedure :
1. Select appropriate comb according to approximate known thickness.
2. Hold comb perpendicular to surface coating to be measured.
3. Press into coating until the comb stands square on substrate.
4. Wet film thickness is between the highest step which is coated and the next (higher) step which remains uncoated.
Application :
Used for checking the thickness coating of wet paint, enamel lacquer, adhensive , architectural coating, color coating, varnish, chemical industry,
or other coating that has been applied to a smooth surface.
MPI TEST
MPI TEST
Spotcheck Cleaner / Remover,
Non-Chlorinated. Flammable. Meets major requirements for major specifications
Spotcheck Penetrant,
Good for rough surface and large parts
Spotcheck Developer,
General purpose solvent developer
MPI Permanent Yoke
MPI Permanent Yoke
Alat Yoke untuk tes MPI pada pengelasan
Supplied with keeper bar with false indications for easily checking the magnetization strength.
Features:
Field strength, with pole tips in contact, greater than 7,000 gauss
Field strength in center of 50 mm air gap, more than 400 gauss.
Weighs only 7 lbs.
Pull Test – More than 40 lbs.
Y8 230V DC Battery Powered Yoke Kit
Y8 230V DC Battery Powered Yoke Kit
Alat Kit tes MPI pada pengelasan dengan tenaga batere
Y8 Battery Operated Magnetic Yoke brings battery portability to magnetic particle yoke testing.
100% portable for field inspections
Battery pack with convenient shoulder strap
Articulating, double-jointed legs contour to part’s shape for superior contact
Solid state controls located in the yoke’s housing for maximum safety and reliability
Weight: 7.75 lbs
Leg Span: 0 – 30.5 cm
Yoke Curent Draw: 4 Amps @ 6 Volts
Battery Charger Current Draw: 0.2 Amps @ 115V or 230V
Cord Length: 12 feet
Kit Includes: Battery Powered Yoke, Charger, Battery Pack with Shoulder Strap, #1 Grey Powder, Powder Spray Bulb, Paint Marker, Scrubs® Hand Cleaner, and Instructions.
ZB-100F FAN-COLLED BLACK LIGHT
ZB-100F FAN-COLLED BLACK LIGHT
Lampu hitam
100W 115V/60Hz/1 ph
Includes transformer, cords, GFCI, plug, and base
Built-in fan keeps light cool
Includes Small Portable Cart (Black LIght Snaps onto Cart)
Testex Replica Tape
Testex Replica Tape
E122—-B Coarse (0.8 – 2 mils)
E122—-C Extra Coarse (1.5 – 4.5 mils)
E122—-F X-Coarse Plus (4.6 – 5.8 mils)
Test method:
Elcometer Testex Tape: ASTM D4417 Method B
In summary, ASTM D 4417 Method C and NACE RP0287-95 require the appropriate tape to be rubbed onto the surface.
The thickness of the tape, when the thickness of the backing has been subtracted, gives the peak-to-valley height of the surface.
Measurements should be made at an agreed series of locations, which characterise the surface.
Thickness Gauge
Thickness Gauge
Untuk mengukur ketebalan cat pada Testex Tape
The Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in Testex Replica Tape.
Available in both Metric and Imperial versions
Quick and easy to use
Anvil pressure as required in the Standards.
Range: 5mm
Dim./Weight: 125 x 95 x 25mm/270g
Scale Resolution: 2µm
Flowmeter untuk Pipa
Flowmeter untuk Pipa
Untuk Mengukur flow aliran dalam pipa
Applications
Water, Wastewater, HVAC/Energy, Monitoring, Power Generation, Mining, Semiconductor, Food and Beverage Flow System, Commissioning and Troubleshooting.
Untuk air bersih, solids-bearing liquid atau aerated liquids pada pipa yang penu tertutup dengan ukuran 1/2 inch (12 mm) sampai 98″
Range : up to 12 m/s
Captures more than 50 reading / second
1 GB of internal memory
Flowmeter termasuk :
– Main Unit Flowmeter
– Universal AC power converter, 95-264 VAC 50/60Hz – C14 Connection
– Sensor & Hardware Kit : sensor untuk pipa kecil dan sensor standard
– Carrying Case and Shoulder strap
Approval : CE + general safety US, Canada and EU
Ukuran pipa :
Sensor Pipa Kecil : Dia 15mm (1/2″) sampai Dia 60mm (2.4″)
Sensor Standard : Dia 50mm (2″) sampai Dia 2500mm (98″)
Tension Meter (China)
Tension Meter (China)
Alat ukur regangan kabel terpasang
High Accuracy and high resolution
Preset qualified value, automatically judge tested value qualified ornot,
buzzer and indicator ligth inside toremind when thelimid when thelimid exceed
blue background light
preset 10 groups of rope parameter, each group can memorize 10 testresult,calculate the average
three units ( kn,tf,Klbf ) convertautomatically;
back-up and recovery rope parameters, and calibrate rope parameterby userself
Automaticcall power-off and power-off time canbe preset
RS -232C output:connect outside printer to print the test result; connect with computer to transfer the test result
Model : KMSEH2T
Capacity : 20KN
Resolution : 0.01KN
Inaccuracy : ±5%
Range : 10%-100%FS Within 0.5%
Rope size : Φ6~Φ 16
Power : 8.4V 1.2Vx7 Nickel hydride battery, Using 40 hours when charging full stanby time about 3 months, battery life 300 times
Weight : 5.62kg
Model : KMSEH5T
Capacity : 50KN
Resolution : 0.01KN
Inaccuracy : ±5%
Range : 10%-100%FS Within 0.5%
Rope size : Φ10~Φ 28
Power : 8.4V 1.2Vx7 Nickel hydride battery, Using 40 hours when charging full stanby time about 3 months, battery life 300 times
Weight : 5.82kg
Model : KMSEH10T
Capacity : 100KN
Resolution : 0.05KN
Inaccuracy : ±5%
Range : 10%-100%FS Within 0.5%
Rope size : Φ10~Φ 28
Power : 8.4V 1.2Vx7 Nickel hydride battery, Using 40 hours when charging full stanby time about 3 months, battery life 300 times
Weight : 5.82kg
Model : KMSEH20T
Capacity : 200KN
Resolution : 0.1KN
Inaccuracy : ±5%
Range : 10%-100%FS Within 0.5%
Rope size : Φ16~Φ 34
Power : 8.4V 1.2Vx7 Nickel hydride battery, Using 40 hours when charging full stanby time about 3 months, battery life 300 times
Weight : 5.82kg
Wire Rope Tester Quantitatively inspect internal and external flaws, including fatigue.
Wire Rope Tester Quantitatively inspect internal and external flaws, including fatigue.
Alat deteksi kerusakan tali kawat (sling)
Untuk wirerope dia 2-16 MM
Inspection technology: weak magnetism inspection
technology;
Inspection Sensitivity: Amax = 5 V/G; Sensitivity modulation value: A = 2.6 V/G;
Operating magnetic field strength: < 20 MT;
Test rope diameter range: 2-200 mm (as defined by specific models);
Testing interval differentiation rate: 0.01 m;
Rope speed: Vmax = 30 m/sec; controlled rope speed range: V = 0.2-13 m/sec; safety testing rope speed: V < 2
m/sec; inspecting resolution not affected by rope speed;
Uncertainty of inspection accuracy: Pmax < 0.5%;
Inspected rope length collating error: C < 10 mm/100 m;
Slight defects: detecting capability > 90%
Major defects: detecting capability > 99%
Total weight for the testing head unit: standard model ≤ 2KG; advanced model ≤3.6KG
Dimension (length, width, and height) for the testing head unit: standard model = 268 mm x 195 mm x 172 mm;
advanced model = 420 mm x160 mm x275 mm
Wide-space inspection and the gap between the sensor and the surface of the rope: 20-30 (mm)
Temperature range: -20℃ ~ +55℃; No temperature drift
Work environment humidity: ≤ 95% RH.
Wire Rope Tester Quantitatively inspect internal and external flaws, including fatigue.
Wire Rope Tester Quantitatively inspect internal and external flaws, including fatigue.
Alat deteksi kerusakan tali kawat (sling)
Untuk wirerope dia 10-26 MM
Untuk wirerope dia 20-42 MM
Untuk wirerope dia 36-54 MM
Inspection technology: weak magnetism inspection technology;
Inspection Sensitivity: Amax = 5 V/G; Sensitivity modulation value: A = 2.6 V/G;
Operating magnetic field strength: < 20 MT;
Test rope diameter range: 2-200 mm (as defined by specific models);
Testing interval differentiation rate: 0.01 m;
Rope speed: Vmax = 30 m/sec; controlled rope speed range: V = 0.2-13 m/sec; safety testing rope speed: V < 2
m/sec; inspecting resolution not affected by rope speed;
Uncertainty of inspection accuracy: Pmax < 0.5%;
Inspected rope length collating error: C < 10 mm/100 m;
Slight defects: detecting capability > 90%
Major defects: detecting capability > 99%
Total weight for the testing head unit: standard model ≤ 2KG; advanced model ≤3.6KG
Dimension (length, width, and height) for the testing head unit: standard model = 268 mm x 195 mm x 172 mm;
advanced model = 420 mm x160 mm x275 mm
Wide-space inspection and the gap between the sensor and the surface of the rope: 20-30 (mm)
Temperature range: -20℃ ~ +55℃; No temperature drift
Work environment humidity: ≤ 95% RH.
Sling/Wire Rope Defect Test (alat deteksi kerusakan tali kawat
Alat deteksi kerusakan tali kawat (sling).
Alat deteksi kerusakan tali kawat (sling)
The instrument is designed to detect stepwise defects such as wire breaks and localised corrosion.
Specification
Range of rope sizes
MD-20: 8 to 22 mm diameter
MD-25: 10 to 25 mm diameter
suitable for detecting any typically broken wire
Sensitivity:
MD20 Wire Rope Tester
Detection level, adjustable by ten-turn potentiometer
Speed of checked rope:
Recommended 0.1 to 2.5 m/s (6 to 150 m/min); results are independent of rope speed
Indicators:
4 light-emitting diodes
LB (red) – low battery/charging
OK (green) – lack of rope defects
D (yellow) – defect (flashing at defect location)
DM (red) – faulty rope (continuous light)
Sound beeper
Supply:
Ni-Cd or NiMH 8.4-9V/100-160 mAh rechargeable battery (included)
or 9V type 6F22 primary battery
Rechargeable battery can be charged inside the instrument by internal circuits and external transformer/charger
(230 V a.c. to 12-19 V d.c. version included)
Operating temperature:
standard MD 20/25: -10 to +40°C
MD 20L: –25 to +40°C
Output socket:
stereo jack coupling
Damage detection signal
Inductive transducer signal
Length: 205 mm
Width: 46 mm
Height with rollers (hand operated, full diameter range): 280 mm
Height with sliding guides for up to 18 mm diameter (mounted tester): 243 mm
Height without rollers and sliding guides (frictionless rope passage through the mounted tester): 163 mm
Weight: MD-20 4,5 kg / MD-25 4,9 kg
Type MD20
Type MD25
Software & Data Acquisition Package for MD25
Software & Data Acquisition Package for MD25
Included:
“- Digital Data Logger with Software for 1-channel
digital data collection (via USB Port to PC)
– Analytical Software for PC”
Note: PC / Laptop is not included
Pipe Locator
Pipe Locator
Alat Deteksi pipa dan kabel bawah tanah
Technical specifications For locator and transmitter
Sensitivity: 5µA at 1 meter (33kHz)
Dynamic range: 140dB rms/√Hz
Selectivity: 120dB/Hz
Depth accuracy Line: ± 5% tolerance 4″ (0.1m) to 10ft (3m)
Sonde: ± 5% tolerance 4″ (0.1m) to 23ft (7m)
Maximum Depth* Line: 20ft (6m) Sonde: 50ft (15m)
Locate accuracy: ± 5%
CD Fault-Finding (CDFF): 5 CD pairs
Fault-Finding (FF): Diagnose cable sheath faults from short circuit to 2MΩ using theA-frame
Batteries Locator: 2 x D-cells (LR20)
Transmitter: 8 x D-cells (LR20)
Battery life Locator: 30 hours intermittent
Transmitter: use dependent on signal conditions typically 15 hours
Dynamic overload protection: 30dB (automatic)
Compliance/Approvals: FCC, RSS 310 RoHS, Weee, CE, Bluetooth®
Weight Transmitter: 6lb (2.84kg) (including batteries)
9lb (4.2kg) (including accessories)
Locator: 4lb (1.87kg) (including batteries)
Environment IP54
In good conditions. *RD8000 will locate to greater depths but with reduced accuracy.
Metal Detector
Metal Detector
Alat deteksi logam
A metal detector uses an electromagnetic field to detect the presence of a concealed metal object. Metal detectors are used at security checkpoints to detect metallic weapons, but they cannot detect weapons made of plastic or ceramic. They are used to find gold and coins in the ground, and can also find land mines.
Specification:
Detectable Indication: Audio/LCD
Maximum Explore Depth: 1.5m(1*1m Aluminium board)
Detectable  Mode: Ground Balance/Discrimination
Explore Frequency: 455khz
Ferrous& Non-ferrous Metal Distinguish
Continous Operating Time: 6-10 hours
Low Battery Indication
External Earphone Jack
Sensitivity Adjustable
Torch Light
Operating Temperature: 0~60℃
Storing Temperature: -20~70℃
Mini Stream Flowmeter
Mini Stream Flowmeter
Alat ukur kecepatan air rendah
Sensor Type : Magnetic
Range : ± 0.05m/sec to 8.0m/sec.
Reading : Total count per unit time
With convertion chart
Accuracy : ±7%.
LCD Counter
Power : 2 AAA batteries (included).
Stick (Pole) : 1m ( 4 section each 250 mm)
PVC Impeller Poles
Extention poles : 75mm, 125mm and 250mm.
For elevation bed
Shaft : Stainless Steel
Cable : Total 2 meter length up to impeler
Mini Current Meter
Mini Current Meter
Specification :
Sensor Type : Magnetic
Range : ± 0.05m/sec to 8.0m/sec.
Reading : Direct value
Unit : m/s and mph
Accuracy : ±7%.
Power : 9 Volt Alkaline
Stick (Pole) : 1m ( 4 section each 250 mm)
PVC Impeller Poles
Extention poles : 75mm, 125mm and 250mm.
For elevation bed
Shaft : Stainless Steel
Cable : Total 2 meter length up to impeler
WATER LEVEL INDICATOR
WATER LEVEL INDICATOR
Untuk Mengukur kedalaman air tanah dari permukaan tanah di dalam sumur atau dalam lubang galian / pengeboran tanah.
Dilengkapi dengan lampu indikator dan buzzer yang berbunyi saat probe menyentuh air.
Tersedia dalam ukuran Metric dengan garis kuning setiap sentimeternya dan tulisan putih pada setiap meternya.
Specification:
Dimension: 26 x 14,5 x 31cm
Cable:
Marking Colour : Yellow
Graduation : every cm
Probe:
Material: Stainless Steel
Size: OD. 2cm x 19cm
Price: 50m depth
100m depth
Current Meter (up to 30m)
Current Meter (up to 30m)
SENSOR
Range : 0.06 to 7.6 meter per second
Accuracy : 2%
DIGITAL INDICATOR READ OUT
Operating range: 0 – 25 fps, 0 – 7.6 mps
Resolution: 0.2 fps, 0.06 mps
Sampling time:
automatic: four seconds
averaging: sixteen seconds
Dimensions: 19.1 x 10.2 x 3.3 cm
Weight: 425 grams
Power: One 9-volt battery
Battery Life: Lithium: 250 hours
Alkaline: 100 hours
Carbon-zinc: 20 hours
Circuitry: CMOS; microprocessor based
Timing: Crystal-controlled oscillator
CURRENT METER TERDIRI DARI :
– Digital Indicator
– Digital Sensor
– 30 meter cable hand suspension
– Sounding Weight (Pemberat) 15 lb
Digital Hammer Test
Digital Hammer Test
Hammer Test Digital
The unit is an integrated digital concrete test hammer which combines data processor and test hammer into one unit. It is widely used for nondestructive testing quality of concrete and building materials in finished structure or prefabricated blocks. From its rebound value, the compressive strength of concrete can be calculated out automatically. All testing data can be stored in memory and transferred to PC by USB cable or wireless by Blue tooth.
Key Features:
• High contrast OLED display
• All setup can be made on site
• Automatic calculating compressive strength
• Automatic correction of impact direction
• All data will be stored in memory
• All data can be transferred to PC by USB cable or bluetooth(optional)
• Dual display for analogue ruler and digital value
Specification:
Display: OLED digital
Range: 10-70N/mm
Accuracy: +/-0.1R
Impact energy: 0.225kgm
Dimension: 280*75*60mm
Net weight: 1.1kg
Bomb Calorimeter( Mengetahui kalori bahan bakar )
Bomb Calorimeter( Mengetahui kalori bahan bakar )
Bomb Calorimeter with Digital Differential Temperature (DDT) / Firing Unit (FU) provides an accurate, simple & inexpensive method for determination of Heat of Combustion, Calorific Values & Sulphur contents of solid & liquid fuels.
The Digital Differential Temperature / Firing Unit with Electronic Timer Beep is having following features:
Temperature Indication : 3 ½ Digit – Digital Display
Differential Temperature Range : 0 – 10ºC
Reading Accuracy of Temperature : 0.01ºC
Firing Voltage for Bomb : 12 V AC
LED Indication for filament continuity
LED Indication for Bomb Calorimeter Combustion
Bomb body machined from corrosion-resistance stainless steel alloy
Each bomb tested at a pressure of 300 kg/cm² or 10 minutes
Offset stirrer precluded heat from motor to calorimeter vessel
Easy to handle and operate
Bomb Calorimeter is supplied with:
1.Combustion bomb
2. Calorimeter with Bomb support
3.Combined lid for calorimeter Vessel & jacket
4. Water Jacket
5. Stirrer
6. Connecting leads
7. Copper connecting tube to connect the fine adjustment Valve with pressure gauge to Oxygen cylinder (Oxygen Cylinder is not supplied by us)
8. Adjustable spanner
9. Ignition wire (20 Meters) Nichrome (36 SWG)
10. Cotton Reel
11. Stand for Bomb lid
12.Hook for lifting Bomb
13.Crucible-2 nos. (SS)
14. Gelatin Capsule 50 nos.
15. O – rings for Bomb & Stirrer (one set each)
16. Instruction Manual
17. Valve for Bomb
18. Valve Key
19. Benzoic Acid (10 tablets)
20. Pellet press
21. Platinum wire ( optional at extra cost)
22. Gas Releasing Valve
Pompa Transfer Minyak
Pompa Transfer Minyak
Performs in a wide range of diesel and oil applications and is perfect for light-duty farm, construction, ranch and industrial applications.
For use with diesel fuel, kerosene, motor oil, gear oil and lube oil.
Features include :
aluminum/Zytel construction,
a 12/24 Volt motor,
a bypass valve,
a 3/4″ manual nozzle and a 3/4″ x 13′ hose.
Flow rate: 12V, 7 GPM, 24V, 10.5 GPM.
Load Tester untuk Battery
Load Tester untuk Battery
The meter performs a 100 amp load test for 6 volt batteries up to 1,000 CCA and a 50 amp load test for 12 volt batteries up to 1,000 CCA.
The super-grip, heavy-duty battery clamps are color-coded, and the meter’s top-mounted rocker switch allows for easy operation.
This shock-resistant meter is housed in a baked enamel steel case and features a rubber-insulated carrying handle for comfort and safety.
Digital Automotive Refractrometer
Digital Automotive Refractrometer
Refractrometer Battery
Propylene Glycol:(0) = (-50) DegC, 0.1, ± 0.5DegC
Ethylene Glycol :(0) = (-50) DegC, 0.1, ± 0.5DegC
Battery : 1.00 ~ 1.5 sg, 0.001, ±0.005 sg
Cleaner : (0) = (-40) Deg C, 0.1, ± 0.5 Deg C
Battery Charger
Battery Charger
Battery Charger
125/15/2 Amp Battery Charger/Starter Designed for use with 6 and 12 volt batteries,
This charger/starter features both manual and fully automatic operation.
Use the 125 amp engine start function for emergency starting.
The charger features a 2 amp slow charge function and a 15 amp fast charge option that charges a battery in 2 to 4 hours when time is of the essence.
The charger will not overcharge batteries and features LED indicator lights and a 6-function rotary switch. Manufacturer’s two-year limited warranty.
170 Piece Tool Set
170 Piece Tool Set
Tools Set
These industrial-quality tool sets are built tough to meet stringent ANSI and ASME strength specifications.
This versatile set includes:
170-Piece Professional Tool Set Featuring all the tools needed for most industrial applications, this tool set includes:
1/2 ” drive –
(1) 72-Tooth Quick-Release Ratchet Drive,
(1) 5″ Extension,
(10) 6-Point Sockets;
3/8″ drive –
(1) 72-Tooth Quick-Release Ratchet Drive,
(1) 3″ Extension, (1) 6″ Extension,
(1) 3/8″ (female) to 1/4″ (male) Adapter,
(2) Spark Plug Sockets,
(25) 12-Point Sockets,
(12) 6-Point Deep Sockets;
1/4″ drive –
(1) 72-Tooth Quick-Release Ratchet Drive,
(1) 3″ Extension,
(22) 6-Point Sockets,
(12) Combination Wrenches,
(2) Pliers (8″ Long Nose Plier and 10? T&G Plier),
(4) Screwdrivers,
(1) 8″ Adjustable Wrench,
(1) Dura-Driver™ Magnetic Bit Driver,
(44) 1″ Driver Bits with Holders (Phillips®, Slotted, Torx®, and Hex), (26) Hex Keys with Holder.
Alat Inspeksi Video
Alat Inspeksi Video
Alat Inspeksi video, vent pipe, machine, engine, perpipaan dll
3.5″ high resolution colour The head camera connection to the probe with adjustable LED light with help to reach the gap
Electronic Torque Wrech
Kunci Momen Electronic
Electronic Torque Wrech
Electronic Torque Wrench
1/4″ Drive, Cap 2-20Nm
3/8″ Drive, Cap 2-20Nm
3/8″ Drive, Cap 2-30Nm
3/8″ Drive, Cap 10-100Nm
1/2″ Drive, Cap 10-100Nm
1/2″ Drive, Cap 30-300Nm
Mechanical Torque Wrench
Mechanical Torque Wrench
Kunci Momen Mekanikal
1/4″ Drive, Cap 2.5-12Nm
1/4″ Drive, Cap 4-20Nm
3/8″ Drive, Cap 4.5-30Nm
3/8″ Drive, Cap 25-125Nm
1/2″ Drive, Cap 10-60Nm
1/2″ Drive, Cap 40-200Nm
1/2″ Drive, Cap 65-335Nm
3/4″ Drive, Cap 100-500 Nm
3/4″ Drive, Cap 200-1,000 Nm
1″ Drive, 300-1,500 Nm
1″ Drive, 600-3,000 Nm
Alat Ukur Tension Belt
Alat Ukur Tension Belt
Alat Ukur Tension Belt
Range: 0-750N; 0-120lb; 0-77Kg; 0-114Seems
Accuracy :=±5%
Belt state indication:Low,OK,Hi
Resolution : ±1N (or1 least significant digit of other units)
Belt width : =36mm
Overload alarm : 750N
Max. load : 850N
Metric/Imperial
Auto power off
Pc interface RS-232C
Power supply : 4×1.5V AAA(UM-4)
Operating condition : 0 ~ 50?,< 85% RH
Dimension : 135×62×33mm (5.3×2.4×1.3inch)
Net weight : 335g(not including batteries)
Optional Accessories :Cable and Software for RS-232 and USB
Vechicle Distance meter and Speed
Vechicle Distance meter and Speed
Pengukur Alat Jarak dan Kecepatan Kedaraan
Ideal for measuring highways, school bus routes, telephone pole spacing, gas pipelines, cable TV length, postal routes, railway length, field crop length, etc.
Accuracy: ±1′.
Resolution: 1′.
Speed: display vehicle speed 0-199 (MPH, Kmh, F/S). Count: Bi-directional Up/Down.
Calibration: automatic, manual, four vehicle memory. Automatic distance conversion: feet, miles, kilometers.
Count hold: stops distance count.
Display hold: freeze display count with out loss of accumulating distance.
Automatic error correction: compensates for sensor error due to vehicle’s dynamic motion.
Operating temperature: 0°C to 70°C.
Power: 9 to 16 VDC
VELOCITY SPEED GUN
VELOCITY SPEED GUN
Alat Ukur kecepatan Kendaraan
Product Description:
“Knowing how fast a player pitches or runs can instantly influence a coaching decision.
Easy-to-use, point-and-shoot pistol grip
Large, clear LCD display
Displays fastest speed once trigger is released
+/- one mph accuracy
Ranges:
Baseball/softball/tennis: 10-110 MPH (up to 90 feet).
Auto racing: 10-200 MPH (up to 1,500 feet).”
Total Station
Total Station
Alat ukur sudut dan jarak untuk pemetaan
Magnification: 33x
Angle accuracy: 3″
Min. Reading: 1″/5″/10″
Range: 1 Prism 2300m
3 Prism 3000m
Distance Accuracy: ±(3 + 2ppm x D)mm
Display: Dual
Tilt sensor: Single axis
Operating Time: 15 hrs
Protection: IP55
Including: 1x DTM-322 3″ (Single Face)
2x Tripod
1x Traverse Prism Set
1x Pole Prism Set
1x Data Serial Cable
4X AA Battery + Charger
Theodolite
Theodolite
“Easy-to-use, accurate instruments for construction and survey environments
Designed for general construction and survey applications, Nikon NE100 Series electronic digital theodolites from TDS give you accurate measurements in an affordable, easy-to-use platform. Nikon NE100 Series theodolites can run 48 hours under normal operating conditions on a set of six AA alkaline batteries. Each models has an ergonomic keypad with one-touch keys for all functions and a large, backlit LCD display help you work productively in the field.”
Magnification: 30x
Aperture: 45mm
Field of view: 1°20′
Shortest focus distance: 0.7m
Reticle illumination: Yes
NE103: (including Tripod)
Angle measurement
Minimum reading: 5/10″(1/2mgon, 0.02/0.05mil)
Accuracy (DIN 19723): 5″/1.5mgon
Compensator: Liquid-electric detection ±3′ (warning if out of range)
Keyboard/Display
Display type: Dot-matrix LCD with 20 characters x 2 lines
Display illumination: Yes
Keyboard/Display: Both sides
Optical plummet
Magnification: 3x
Focus range: 0.5 to infinity
Leveling base: Detachable
Battery
Continuous operating time (manganese battries): 21 hours
(alkaline batteries): 47 hours
Operating temperature range: -20°C to +50°C
Environmental specification: IP56
NE100: (including Tripod)
Angle measurement
Minimum reading: 10・20″(2/5mgon, 0.05/0.1mil)
Accuracy (DIN 19723): 10″/3mgon
Keyboard/Display
Display type: Dot-matrix LCD with 20 characters x 2 lines
Display illumination: Yes
Keyboard/Display: Single side
Optical plummet
Magnification: 2.2x
Focus range: Fixed (1.3m)
Leveling base: Detachable
Battery
Continuous operating time (manganese battries): 22 hours
(alkaline batteries): 48 hours
Operating temperature range: -20°C to +50°C
Environmental specification: IP54
Waterpass / Automatic Level
Waterpass / Automatic Level
Alat ukur sudut ketinggian
Specifications:
– Measurement range: 0° to +/- 90°
– High Resolution: 0.1°
– Operating Temp.: 0°C to 50°C
– Long battery life with 3 minutes auto off
– Size: 200 x 42.5 x 18 mm
Features:
– Easy, Clear & Precise Digital display
– Hold function to freeze display
– buzzer sound
Francis Barker Compass
Francis Barker Compass
Penunjuk arah mataangin Francis Barker
The M-73 Liquid Prismatic Compass is a robust, precision instrument of predominantly brass construction, designed to withstand the most hazarduous climatic conditions.
Quick, precise settlement of the liquid filled dial assembly allows rapid use of the compass in field conditions.
Five self-luminous tritium light sources enable full night and daylight operation and every component of the M-73 can be replaced leading to years of continuous, reliable use.  The black M-73 is supplied in a grey hand made satin-lined presentation box complete with leather pouch and full instructions.
Features
▪ Degrees version
▪ Fully functional
▪ Supplied with full instructions
▪ Full day/night use – 5 tritium lights
▪ Military Issue
▪ Rotating bezel with lock screw
▪ Complete with Case
Specification:
Size: 85 x 60 x 34mm
Weight: 210g
Operating Temperature: -30°C to +55°C
Pivot: Sapphire Jewel
Liquid: Purified Kerosene
Graduation: Degrees (360 Divisions)
Night Illumination: 5 Tritium Light Source
Accuracy: One half of one degree (10 mils)
 Brunton® GEO™ International Geological
Structural Transit
Brunton® GEO™ International Geological Structural Transit
Kompas Geologi
Built to last a lifetime!
This transit’s single NdFeB magnet resists demagnetization better than other types of magnets for increased reliability.
The induction damped needle provides quick, accurate readings while the sapphire jewel bearing allows for smooth needle movement.
Two long-level bubbles on the aluminum housing permit no-guess leveling from the sides or the bottom.
O-rings make the transit waterproof.
Other features include adjustable needle locking mechanism with two positions, hinge inclinometer with 2° increments for 1° readable dip measurements, and “Buck Horn” style sights for increased accuracy when sighting azimuth or vertical angles. Leather case included.
Lifetime warranty from Brunton.
Horizontal angles: 0-360° (Azimuth), 1° graduations.
Vertical angles: ±90°, vernier reading to 10 minutes, ±100% grade, 5% divisions.
Declination adjustment.
Suunto PM5/360PC Clinometer with Percent and Degree Scales
Suunto PM5/360PC Clinometer with Percent and Degree Scales
Height, slope and vertical angle measurements made easy!
Suunto clinometers can be used to measure heights of trees, towers, buildings, etc.; to measure slopes for grading or preliminary surveying; and to measure vertical angles for cellular and satellite installations and more. All Suunto clinometers feature a solid aluminum housing with jeweled bearing assembly. Damped scale for smooth, accurate readings. Parallax-free lens. 1/4” x 20 threaded tripod socket. Includes lanyard and black nylon case. ±150%, ±90°. Cosines to 45° on back.
Specifications
Dimensions: 2-3/4” x 2” x 5/8”.
Weight: 4.2 oz.
Graduations Degree: 0-90° in 1° units.
Percent: 0 to 70% in 1% units, 72 to 150% in 2% units.
Scale readings can be estimated to 10 minutes or 1/5%, when readings are made around the zero level.
Haglöf HEC2 Electronic Clinometers
Haglöf HEC2 Electronic Clinometers
Eliminate calculation errors!
These electronic clinometers provide accurate height and angle measurements quickly and easily. Height measurements can be taken from any distance that is measured and entered. Choose from these functions: DIST (distance setup and height measuring), HGT (height measuring), and DEG (angle measuring). Results are displayed once measurement is complete, and no manual counting is required. Lightweight yet rugged, the clinometers can withstand the toughest use in the field. These highly efficient instruments offer extremely low battery consumption and feature a low battery indicator and backlight. Four models to choose from.
Specifications
Accuracy: ±0.2’; ±0.2° (depending on the accuracy of the distance entered).
Operating temperature: -4°F to 120°F.
Power: 1 AA battery (not included).
Suunto® Precision Compass KB-14 Classic with Optical Adjustment
Suunto® Precision Compass KB-14 Classic with Optical Adjustment
Penunjuk arah mata angin KB14
Precision, accuracy and easy operation.
Calibrated for Zone 1
Our most popular model. Features optical adjustment. Heavy-duty impact and corrosion resistant aluminum housings are flat and compact with no protruding or adjustable parts. Needle cards are immersed in a clear, low-viscosity liquid damping for smooth, vibration-free movement. Needle cards pivot on polished sapphire bearing.
Azimuth models graduated to 1/2°;
estimate to 1/4°.
Quadrant models are graduated in 1° units.
Cotangent table printed on back.
Balanced for use in Northern Hemisphere.
Black nylon case included.
Size: 3” x 2” x 9/16”
Suunto® Tandem Compass/Clinometer
Suunto® Tandem Compass/Clinometer
Slope and height measurements and compass bearings in one instrument!
Zone 1, w/o Declination Adjustment
The Suunto Tandem combines a liquid damped precision compass and clinometer in one compact, rugged aluminum housing that protects against impact, corrosion, and water.
Clinometer scale is graduated in percent and degree (0-90°, 0-150%); compass scale is in azimuth (0-360°) with the option of declination adjustment (20° East and West).
The compass is graduated in 1/2° increments, and the clinometer is graduated in 1°/1% increments. Both the compass and clinometer are individually calibrated. Engraved inch scale and cotangent and cosine tables to 45 on the back. Threaded tripod socket. Includes carrying case and lanyard.
Hypsometer 3D
Hypsometer 3D
Hypsometer 3D with Digital Compass Feature – Capable of determining canopy spread and horizontal missing distances
This lightweight, handheld hypsometer uses Class I eye safe laser technology to measure tree diameters and log volumes at the touch of a button! Designed for one-person operation, you simply point and shoot. The LaserAce measures a target’s distance, elevation, height, and diameter as well as slopes and gradients. The unique aiming and diameter scope allows you to easily take remote measurements, and an electronic “brush filter” ensures accurate distance measurements to prism targets in areas of scrub or undergrowth.
The LaserAce features a two- and three-point mode for leaning trees as well as an onboard multifunction computer which stores results (up to 3,000 trees) for later viewing or downloading to your PC or PDA using the Bluetooth® (or RS232) data link.
Water and dust resistant to IP 66.
Range: 1 km (3,280′) to prisms; 150 m (500′) with no reflective target; 600 m (2,000′) with reflector; ±70° from horizontal.
Accuracy: 5 cm (2˝); 0.2° at level.
Power: 7.2V lithium ion rechargeable batteries (normal use, 8 hours of power).
Weight: 14 oz.
Dimensions: 4.33˝L x 3.94˝W x 1.97˝H.
Includes: padded soft carry bag, battery, battery charger and wrist strap
Nikon® Forestry PRO Laser Rangefinder/Hypsometer
Nikon® Forestry PRO Laser Rangefinder/Hypsometer
The ultimate forestry tool, this precision rangefinder/hypsometer provides accurate range, height, and angle measurements. The Forestry PRO features a three-point height measurement function that allows for accurate measurements even in dense areas of thick brush. Provided with a clear line of sight to a point on the stem, the unit calculates horizontal distance, then captures two other points to create an angle, and accurately calculates height.
First Target Priority Mode allows you to range small objects and obtain an instant reading. Distant Target Priority Mode displays the range to the farthest target among the targets measured.
The Forestry PRO features 6x magnification and provides several measurement readout options including actual distance, angle compensated distance (horizontal distance), angle (degrees), and height. Results are displayed in yards, meters, or feet. Featuring both an internal display and an external LCD display, reading the measurement data is easy.
The Forestry PRO is waterproof and comes complete with a field case, quick start guide, and battery.
Range: 11 to 550 yds.; 10 to 500m; 33 to 999 ft.
Resolution: 0.5 yds.; 0.5m; 1 ft.
Accuracy: ±1/2 yd. out to 99 yds.; ±1 yd. from 100 to 550 yds.
Power: one 3V CR2 battery (included).
Laser Finder
Laser Finder
Alat ukur jarak (Laser)
Measuring range(M): 0.1~40M,50M,60M,70M,80M,100M
Measuring accuracy(mm): +/-2mm
Measuring unit option: mm/in/ft
Continuous measurement function: yes
Outdoor target reflection board: no
Area measurement function: yes
Vol. measurement function: yes
Pythagorean theorem mode: full mode
Add and subtract measurement function: yes
Max. store: 99 data
Max/ Min value: yes
Auto. backlight: yes
Button/keys sound: yes
Laser class: II
Laser type: Wave=635nm, ≤ 1mW
Laser auto off: 20S
Unit auto off: 150S
Storage temperature: -20℃ ~60℃
Working temperature: 0℃ ~40℃
Storage Humidity: 85%RH
Battery: 1.5V*3 AAA
Weight (included battery): 160g
Size: 118×54 x28mm
Wood Moisture Meter
Wood Moisture Meter
The HT 65 is an electronic wood moisture meter based on the electric resistance measurement principle. It is designed for precise measurements of sawn timber (up to 180 mm thick), particleboards and veneers. The device is ideal for both single and series measurements before, during and after processing wood.
This meter is additionally equipped with a wood temperature compensation system, which automatically adjusts the measured value to the set temperature. The measuring range from -10° – +40° C is adjustable.
The Hydromette is especially applicable for saw mills, parquet manufactories and woodworking industries.
Measuring Range
Wood: 4 – 60 % moisture content (m.c.)
Features
Handy quick moisture meter for fast single and series measurements
Direct displaying of wood moisture in percent via digital LCD, resolution: 0.1 % m.c.
Four-step wood species selector for an automatic correction of measured values for over 300 species of wood
Automatic compensation of wood temperature in the range of -10° – +40° C
Fully automatic instrument setting
Power supply by 9 V dry cell or rechargeable battery (optional equipment)
Dimensions: 140 [L] x 90 [W] x 42/50 mm [H], weight approx. 220 g
dijual

 

Ngobrol aja yuk..
Butuuh Bantuan
Halo...
Can I Help You..???